KRMit Posted April 27, 2004 Report Share Posted April 27, 2004 I just got the kit in today and pretty well everything has gone through without a hitch with the exception of the airbox adapter plate. I've got it mounted to the airbox but now there's no way to get the airbox in place. Before, with all the rubber boots I could hook the front just by pushing in real hard. This metal doesn't flex though. Anyone have any suggestions? I've tried going from the top and the back, neither works. I can't get either front side to hook on the knobs. Thanks for any help! Quote Link to comment Share on other sites More sharing options...
brock_fuzzy_69 Posted April 27, 2004 Report Share Posted April 27, 2004 yes its a bitch to say the least i have thought of cutting off the 2 little nubbs on the frame to make it easier Quote Link to comment Share on other sites More sharing options...
KRMit Posted April 27, 2004 Author Report Share Posted April 27, 2004 (edited) I just called Trinity and he said to cut off the bottom of the hooks on the front of the airbox. That's apparently in the instructions that come with the kit, but of course I didn't get those. I'll give that a shot tonight. Has anyone else tried this? Edited April 27, 2004 by KRMit Quote Link to comment Share on other sites More sharing options...
rebelbanshee2 Posted April 27, 2004 Report Share Posted April 27, 2004 i have cut the bottoms of the hooks on my box for use with duals, works great i would think it would work the same with duals Quote Link to comment Share on other sites More sharing options...
ngelati Posted April 27, 2004 Report Share Posted April 27, 2004 I just bpught a used kit, off course i dont have any instructions. Can someone email me the intructions? Quote Link to comment Share on other sites More sharing options...
KRMit Posted April 27, 2004 Author Report Share Posted April 27, 2004 I just bpught a used kit, off course i dont have any instructions. Can someone email me the intructions? Yeah, I could go for that too if anyone has them. Quote Link to comment Share on other sites More sharing options...
sredish Posted April 27, 2004 Report Share Posted April 27, 2004 I attached the carb to the airbox, plate and all and put the boot on the intake and slid the whole carb/airbox deal on and bolted into place. It's kind of a bitch, but that worked for me. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.