coolhead03 Posted April 26, 2004 Report Share Posted April 26, 2004 http://www.bargainnews.com/BNO/photo_nd.cf...405&TheDealer=0 I found this on bargain news and was wondering if its worth having at that price as a second quad. I dont know much about cannondale exept that they are high tech and expensive. I went to a cannondale site and they had a similar one for 5500. Opinions from those who know would be helpfull Quote Link to comment Share on other sites More sharing options...
Banshee33 Posted April 26, 2004 Report Share Posted April 26, 2004 high tech and expensive Well if it was me I would get a 2nd shee. Not many people have them so I ask the question are the worth it? Quote Link to comment Share on other sites More sharing options...
coolhead03 Posted April 26, 2004 Author Report Share Posted April 26, 2004 http://www.bargainnews.com/BNO/photo_nd.cf...186&TheDealer=0 OK forget that I found a sweet j arm. Take a look. Any thing you think I should be aware of or cautious about. Quote Link to comment Share on other sites More sharing options...
Banshee33 Posted April 27, 2004 Report Share Posted April 27, 2004 Much better . Are you going to ride it (test ride)? If I were you I would. look to see how clean it is & look for any hack work etc. Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted April 27, 2004 Report Share Posted April 27, 2004 i wouldnt bother with one. hard to get parts for i hear and they arent that fast. at least none that ive raced were fast. i guess if you wanted to race mx itd be ok, but then again id still go with a 450 Quote Link to comment Share on other sites More sharing options...
Travis's Banshee Posted April 27, 2004 Report Share Posted April 27, 2004 I've rode a couple c-dales. They ran pretty good. I wouldn't be afraid to have one as a 2nd ride. ATK has taken them over and parts are available. They do require alot of maintenance, and you can chase glitches forever if you don't know what your looking for. As far as the price. About a month ago there was a dealer in Tomball Tx. That was advertising new cannibals at cycle traderonline for $3995. Hope this helps. Quote Link to comment Share on other sites More sharing options...
Gargamel Posted April 27, 2004 Report Share Posted April 27, 2004 I had a dealer in town selling them cheep too. After the research I did I found they had alot of defects and require ALOT of maintainence. I passed it up and would recemmend you do the same. There is a list of upgrades that have to be done or the motor will blow. http://www.cannondaler.com/articles.php Lots of info on the c-dale. Just like this forum but c-dale only The only thing I want off the c-dale is the efi to put on my shee Hope it helps Quote Link to comment Share on other sites More sharing options...
coolhead03 Posted April 27, 2004 Author Report Share Posted April 27, 2004 Thanks guys I aprieciate the help. I didnt realize that the cannibal was that cheap new, thought i might of found a steel. Thats the only reason i considered it. As for the j arm it was sold, the guy just e mailed me back. Thanks agian for the help Quote Link to comment Share on other sites More sharing options...
Gargamel Posted April 27, 2004 Report Share Posted April 27, 2004 its cheep cause c-dale atv went belly up Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.