Otis Posted April 20, 2004 Report Share Posted April 20, 2004 I tried a search and even looked in each forum, but couldn't find it...... I was looking for it because my riding pants melted on to the pipe, and now the pipe looks like crap... ... If anyone can find the post or tell me what will take it off, i will gladly buy them a beer (I.D. required)..... Thanks... Quote Link to comment Share on other sites More sharing options...
ledofthezep Posted April 20, 2004 Report Share Posted April 20, 2004 Same deal here,...my boots always melt on my headers. You can scotch-brite the shit off of there & then polish it up with mothers. I'm to the point where i don't really give a chit...I plan on getting them ceramic coated someday when I get tired of looking at the melted shit on the pipes. Dunno where that post's at that you're asking about. Quote Link to comment Share on other sites More sharing options...
DUNEDEMON Posted April 20, 2004 Report Share Posted April 20, 2004 Stay away from "scotch brite" I have found that it will scratch the chrome on pipes. Instead try using some #00 steel wool with some glass cleaner as lubrication, works great for me. Quote Link to comment Share on other sites More sharing options...
ledofthezep Posted April 20, 2004 Report Share Posted April 20, 2004 Sounds good Dunedemon, I haven't had any problems yet...but I also haven't had to scrub on them a whole lot. Does scuff a bit, but nothing I've not been able to buff out. Next time I'll try your steel wool & glass cleaner gig. Quote Link to comment Share on other sites More sharing options...
SANDSTAR Posted April 20, 2004 Report Share Posted April 20, 2004 I use the 0000 steel wool, and it will get off anything that melts on those chromed beauties. Go to a Harley dealer and they will sell you some stuff that removes the heat "blueing" that you will get on T-5's and T-6's from using the Toomy jet kit. Quote Link to comment Share on other sites More sharing options...
banshee tuner Posted April 20, 2004 Report Share Posted April 20, 2004 I've posted this before and I guess people like to do it the hard way, but spray carb cleaner and wipe it off with a shop rag and your done. It works wonders and does not harm the chrome. Quote Link to comment Share on other sites More sharing options...
Hockey390 Posted April 21, 2004 Report Share Posted April 21, 2004 here ya go...I think this is what you were looking or. http://www.bansheehq.com/forums/index.php?...topic=22584&hl= Quote Link to comment Share on other sites More sharing options...
Dune Ratt Posted April 22, 2004 Report Share Posted April 22, 2004 use a razor blade to get the really baked of stuff off, and then the crb cleaner trick works good. be careful and do not scratch the crome with the blade otherwise you will Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.