trigg Posted April 19, 2004 Report Share Posted April 19, 2004 i have been running my shee for a few weeks with the rz engine in , but last week i raced against another rz powered shee and i noticed his power valves started to open at about 6000rpm while mine starts to open at 3500rpm so whats up with it trigg Quote Link to comment Share on other sites More sharing options...
broke Posted April 19, 2004 Report Share Posted April 19, 2004 I do know that different years opened at different times. I don't remember exactly which ones were what, but it was for emmision(sp) bullshit. Mine had all the electronics off of an 85 and I would guess it would be opening about 6000, hard to tell without a tach. Good luck broke Quote Link to comment Share on other sites More sharing options...
theeechozen1 Posted April 20, 2004 Report Share Posted April 20, 2004 how did you gauge when they started to pivot??? Quote Link to comment Share on other sites More sharing options...
broke Posted April 20, 2004 Report Share Posted April 20, 2004 By watching the powervalve servo(not while riding.) I can actually feel when it does it as I'm riding also. broke Quote Link to comment Share on other sites More sharing options...
trigg Posted April 20, 2004 Author Report Share Posted April 20, 2004 how i knew what rpm was an estimate i have been a machanic for years and it's a feel thing if you blip the throttle it starts to move the cdi/stator is off a 1985 the servo is off a 1994 and not sure what age the yvps computer is off but i have tryed another servo and it,s exsactly the same. trigg Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.