papa_smurf49319 Posted April 14, 2004 Report Share Posted April 14, 2004 How much tranny fluid do i put into a empty gearbox i know it says 1500 cm3 on the case Quote Link to comment Share on other sites More sharing options...
ledofthezep Posted April 14, 2004 Report Share Posted April 14, 2004 1.6 quarts. Some people run 2. I've always ran a little over 1 & 1/2 quarts of Valvoline 10w30 and have never had any issues. Quote Link to comment Share on other sites More sharing options...
MotulMonsta Posted April 15, 2004 Report Share Posted April 15, 2004 I'll get about 2 1/2 quarts in my tranny..takes time for the oil tio settle and work it's way into all the gears. I keep my level at about 1/2 on the dipstick. Quote Link to comment Share on other sites More sharing options...
banshee76179 Posted April 15, 2004 Report Share Posted April 15, 2004 1.6 quarts. Some people run 2. I've always ran a little over 1 & 1/2 quarts of Valvoline 10w30 and have never had any issues. after rebuild 1.8 qts. Quote Link to comment Share on other sites More sharing options...
sweetshee4312 Posted April 15, 2004 Report Share Posted April 15, 2004 does ne one actually go by the dipstick, casue with like 1.7 quarts im 1/2 up the dipstick Quote Link to comment Share on other sites More sharing options...
02_banshee Posted May 12, 2004 Report Share Posted May 12, 2004 i use 1.8 ltres Quote Link to comment Share on other sites More sharing options...
frocashmoney24 Posted May 12, 2004 Report Share Posted May 12, 2004 used to do 1.7, now i just throw in 2 to make sure it stays above the ball n rod so they dont get welded Quote Link to comment Share on other sites More sharing options...
lincster Posted May 12, 2004 Report Share Posted May 12, 2004 Clymers says 1.8qts. Exact conversion from 1500cm3 is 1.585032 qts, or 3.170065 pints, or 1.5L, or .3962581 gallons.... I have a cool program that does conversions. I have always done 1.8qts. Quote Link to comment Share on other sites More sharing options...
InFlames Posted May 14, 2004 Report Share Posted May 14, 2004 YA I put it takes a little more than 1.5 bottles of bel ray gear saver...85wt. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.