Demon350 Posted April 12, 2004 Report Share Posted April 12, 2004 how do i clean it ? its messed up with sand and my kickstarter is loose too, messes up ur legg bad when u jump, any ideas ? Quote Link to comment Share on other sites More sharing options...
bigwill Posted April 12, 2004 Report Share Posted April 12, 2004 It is illegal to use the stock air filter after you have posted on this site more than 50 times Replace-replace-replace-lose that whole set-up-any after market set-up is better than the stock garbage Quote Link to comment Share on other sites More sharing options...
itsaripper Posted April 12, 2004 Report Share Posted April 12, 2004 I would clean it with fire. Put it in the fire and watch all the dirt go away. Then go get a K&N. If you just have to use that stock POS wash it with dawn and warm water, shake out and let dry. Install and you are ready to go. Why do I feel like I just told someone how to destroy his motor. Quote Link to comment Share on other sites More sharing options...
. Posted April 12, 2004 Report Share Posted April 12, 2004 dont lie to him itsaripper, you cant clean the stock filter.....they are disposable filters. You just throw them away and buy an aftermarket setup. Quote Link to comment Share on other sites More sharing options...
banshee76179 Posted April 12, 2004 Report Share Posted April 12, 2004 get a uni filter cheaper than cleaning the old 1! Quote Link to comment Share on other sites More sharing options...
Demon350 Posted April 12, 2004 Author Report Share Posted April 12, 2004 the plan was to not spend a thing and get the duncan racing kit, which has everything in it... so......ill leave the filthy fecker on Quote Link to comment Share on other sites More sharing options...
sredish Posted April 12, 2004 Report Share Posted April 12, 2004 the plan was to not spend a thing and get the duncan racing kit, which has everything in it... so......ill leave the filthy fecker on just ask yourself, "do I really need an airfilter?" if not, then just forget about the whole damn thing. Quote Link to comment Share on other sites More sharing options...
. Posted April 12, 2004 Report Share Posted April 12, 2004 isnt the stock filter and no filter at all basically the same thing? Quote Link to comment Share on other sites More sharing options...
bigwill Posted April 12, 2004 Report Share Posted April 12, 2004 If you keep running with that filter-you will need that Duncan racing kit and PARTS!!!!!!!! Quote Link to comment Share on other sites More sharing options...
BansheeBrian Posted April 12, 2004 Report Share Posted April 12, 2004 Allright man, Soak the filter in kerosene as it sits in the kero push it around to help get the dirt out. Take it out,squeeze out kero then shake out any extra.Using a rag squeeze the foam filter with the rag til no kero shows on the rag.Then using your favorite 2-stroke oil lightly coat it and you're good. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.