sam97 Posted April 10, 2004 Report Share Posted April 10, 2004 I have just bought Pro Circuit Platinum pipes and a Pro Flow K&N kit on Ebay. I am coming from an old DG exhaust and the factory filter setup. Will I need to rejet to accomodate these changes? If so, what do I need to do? I am an absolute beginner with this kind of tech, so any help would be great. Thanks a lot. Quote Link to comment Share on other sites More sharing options...
spoin39 Posted April 10, 2004 Report Share Posted April 10, 2004 Yes, you need to rejet. As of the correct jetting for you, hard to tell what elevation and temps you are in. My guess would be to go to a 290-300 main, needle in 3rd notch from pointed end, and stock pilot. If you give more info about airbox setup and elevation, might be able to get you closer. Quote Link to comment Share on other sites More sharing options...
banshee76179 Posted April 10, 2004 Report Share Posted April 10, 2004 Yes, you need to rejet. As of the correct jetting for you, hard to tell what elevation and temps you are in. My guess would be to go to a 290-300 main, needle in 3rd notch from pointed end, and stock pilot. If you give more info about airbox setup and elevation, might be able to get you closer. That sounds about right to me, maybe u might wanna play w/needle setting! Quote Link to comment Share on other sites More sharing options...
Otis Posted April 10, 2004 Report Share Posted April 10, 2004 read this....best damn tech advice ever Quote Link to comment Share on other sites More sharing options...
sredish Posted April 10, 2004 Report Share Posted April 10, 2004 If your running w/o an airbox lid, you could be up to 310 pretty easy, unless your at a higher elevation. Once you get 'er close, it won't hurt to try the 4th clip on the needle either. Some really like it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.