Im-Loving-It 69 Posted April 8, 2004 Report Share Posted April 8, 2004 OK right now IM having a problem. IM getting crank case oil in my cylinders because its spiting it out the back of the pipes, and when I pull out the plugs there is some oil on them also. And IM also getting an air leak some were. I know its not in the boots. So if you pros know what my problem is that would help me out a lot. Because IM so Fucking pissed at that dame thing IM about to set the fucker on fire!!! ~ Craig ~ Quote Link to comment Share on other sites More sharing options...
reas11 Posted April 8, 2004 Report Share Posted April 8, 2004 i guess your aren't loving it anymore. how do u know its crankcase oil and not too much premix?what ratio are u running it at ? Quote Link to comment Share on other sites More sharing options...
SDD Posted April 8, 2004 Report Share Posted April 8, 2004 Your air leak might be the source of the oil. Do a leak down test and see if your are leaking out of your case vents. If you are leaking from there your crank seal is bad. Quote Link to comment Share on other sites More sharing options...
MADMOOSE Posted April 8, 2004 Report Share Posted April 8, 2004 i would say what kind of premix are u using...me and "crapaholic" were using crap castrol in his yz125 and it was eventualy dripping out his silencer constantly....after we changed to amsoil it was nothing....but if ur getting motor oil up there u got a problem for sure....i would check the gaskets and if there fine look for cracks or somthign like that on the crank walls...could even be a seal on ur crank bearings...i think ur almost goona have to tear it down oh and u dont have to set it on fire its a yami it will do a good job of that itself Quote Link to comment Share on other sites More sharing options...
wansomordis Posted April 8, 2004 Report Share Posted April 8, 2004 Hey that makes 2 of us WELL you and my buddy.. here is the link from which my question was answered... http://www.bansheehq.com/forums/index.php?showtopic=25993 Quote Link to comment Share on other sites More sharing options...
MRMOONEY Posted April 8, 2004 Report Share Posted April 8, 2004 i would guess its your crankcase seal, happens all the time... Quote Link to comment Share on other sites More sharing options...
Im-Loving-It 69 Posted April 8, 2004 Author Report Share Posted April 8, 2004 i just put new crank seals in. And when i put them in i put some yama lube around them. ? was that a bad thing to do ? Quote Link to comment Share on other sites More sharing options...
Im-Loving-It 69 Posted April 12, 2004 Author Report Share Posted April 12, 2004 Please Help me out i need some answers Quote Link to comment Share on other sites More sharing options...
erbilabuc Posted April 12, 2004 Report Share Posted April 12, 2004 what kind of oil do u use? pre mix that is Quote Link to comment Share on other sites More sharing options...
Im-Loving-It 69 Posted April 12, 2004 Author Report Share Posted April 12, 2004 Also Im mixture is 40-1 Quote Link to comment Share on other sites More sharing options...
erbilabuc Posted April 12, 2004 Report Share Posted April 12, 2004 its probably just the premix and your jetting might still be too rich. Why did u put yamalube around crank seals? Quote Link to comment Share on other sites More sharing options...
Im-Loving-It 69 Posted April 13, 2004 Author Report Share Posted April 13, 2004 Because i thought it would make a better seal around the seals. Quote Link to comment Share on other sites More sharing options...
erbilabuc Posted April 13, 2004 Report Share Posted April 13, 2004 Because i thought it would make a better seal around the seals. yamalube or yamabond? Big difference between the two! Which one did you use Quote Link to comment Share on other sites More sharing options...
Im-Loving-It 69 Posted April 13, 2004 Author Report Share Posted April 13, 2004 Oh im sorry I used yamabond. The stuff that you put betwee the two halfs of the cases. Quote Link to comment Share on other sites More sharing options...
SoldtheRMforaShee Posted April 13, 2004 Report Share Posted April 13, 2004 bad idea man, thats probably where its comming in. Its a good thing to coat them with oil, 2 stroke oil, but not sealant Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.