l0wrider Posted March 28, 2004 Report Share Posted March 28, 2004 im not sure why its doing this but my shee is always going a little to the right. Even with the right amount of air pressure in the tires it still does. Now the a-arms dont look bent at all. The handle bars are a little bent but i dont think that has anything to do with it. When i let the handle bars go, thats when it wants to go to the right. And while im actually riding in the trails, its much easier to turn to the right then to the left. Sometimes, its actually hard. Can anyone help me out a lil. Quote Link to comment Share on other sites More sharing options...
banshee04le Posted March 28, 2004 Report Share Posted March 28, 2004 Grab your front tires and jerk them around side to side. If there is slop, its time for new wheel bearings or a-arm bushings. If thats tight, just look at the bike from the front. Are both tires straight, when the handlebars are straight? If not, look at your steering stem where the tie rods connect. Set the bike up on its grab bar to get a good look at the bottom of the steering stem. The part of the stem where the tierods connect likes to bend. Quote Link to comment Share on other sites More sharing options...
Toomey Banshee Posted March 28, 2004 Report Share Posted March 28, 2004 your steering stem is bent. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.