SyNtAxx Posted March 27, 2004 Report Posted March 27, 2004 Hey, I was jetting my ported quad... I am at 360 on mains and 30 on pilots. i raised the needle to the 4th slot from the top(richer) anyhow now it seems liek it sputters on the mid section....untill the reeds open... then its a rocket ship.... I tried adjsutingmy carbs...no good. I even ran with out a airbox lid to see if it would fix it...nope... So you guys think I should jsut move the needle back to the stock location? (3rd notch?) My mods are lsited below and its about 50-70 degrees here now in Pa. and I ride at about 800-1800 feet. Nick Quote
Banchetta Posted March 28, 2004 Report Posted March 28, 2004 Lower the needles back down....The 30 pilots are already running the whole circuit richer..... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.