sredish Posted March 25, 2004 Report Share Posted March 25, 2004 Sup guys. My machine is running pretty damn good and haven't had any trouble. However, I'm bored. Haven't had to work on shit lately, doing the washing it every day for the me time with the banshee. I want to experiment with some needle tapers. See if I can push the threshold of air/fuel mixture. I'm on the 4th clip, and haven't tried the 5th. I'll do that and see how she does. What i was thinking, was a steeper taper to bring the fuel on a little quicker or something. I'm not too familiar with how to id the tapers and diameters. I know they use a letter system to identify the different parts, but I was hoping someone could help me learn to identify the digits as to the taper and stuff so I can go about with changing the different parameters. I know carbparts.com has diagrams and I'll check some of them out. You know, I could always buy more crap to put on, now that's not a bad idea. Later, Scott Quote Link to comment Share on other sites More sharing options...
DUNEDEMON Posted March 25, 2004 Report Share Posted March 25, 2004 You may try checking with "Suddco" for information regarding the needles, they may have what you are looking for. Quote Link to comment Share on other sites More sharing options...
Big Blue Posted March 26, 2004 Report Share Posted March 26, 2004 give carbparts a call again, they have what you need and will give you some info also, i just talked to them yesterday about mine. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.