biffdenman Posted April 16, 2004 Report Share Posted April 16, 2004 the little icon your using fits you good, I assume thats what your life consists of, masterbation? You must know quite a bit about porting, you have your own nationwide successful porting business right? What's it called by the way? I see alot of guys always talking about how this shop sucks and that shop sucks, but yet I am to see any of those guys who actually have their own shop, hmm, why is that? Maybe you just know too much to open and start your own shop, your intellegence is just far beyond the relm of what a speed shop can do, an internet message board is where you belong, speaking your unsurpassed knowledge and one sided opinions to all the inferior inexperienced adolesents that you can get to listen to your sorry cries, insulting everthing you don't understand or want to believe in, do you believe there is a Christ, have you ever seen him, how do you know he exist? Do you need prove there is a God also? Ok I have to go to class, I am not going to keep up with this low level of intellect, its tiring and on a serious negative basis, I guess if you think you keep on talking down this shop you will hurt them in the pocket, but from last I have seen they are the busiest they have been in the last 5 years, must be all your talk about them has brought in more business by just spreading the word around, see someone with a good sense of business can take an inexperienced, unknowledgable, hateful persons negative remarks and turn them into profits, you guys ever get an education in marketing and business, ah, what am I wasting my time talking to you high school know it alls for, you better get to work also, and yes, I WOULD LIKE FRIES WITH THAT, someone has to serve the educated people of america, might as well be someone like you 2 guys Quote Link to comment Share on other sites More sharing options...
davidj5491 Posted April 16, 2004 Report Share Posted April 16, 2004 Ok biffdenman, you need to go back to BlasterHQ. You've done nothing for either side of this argument. You just decide to register here so you can come on here and insult people's intelligence, just to back up your friend? If you had tried to show any valid information, that'd be one thing, but all you've done is thump your chest, talk about being a big time college student, and try to insult our intelligence. Fact of the matter is this: Blasters are good bikes for beginners and women (someone of college age should be able to handle a bit more...... ). They offer a nice entry level power range. And with a few mods, there is a little room to grow. But Banshees are what we big boys grow into. You'll understand that one day, probably right about the time your balls decide to drop. And just to prove that I'm not just trying to start shit here, here's my 2 cents on the matter. There are many builders in this country that claim to make HP. There are a lot less that actually stand out, and really do make the HP they claim. Examples of some of these are A&S Racing, K&T, and Packard Enterprises. They make awesome power with anything they build. When is the last time you saw any of these guys polish intakes? Or rifle carbs? They don't, and the reason they don't do it is because it doesn't work, and doesn't provide customers with the ride they want/need. Now maybe this is just me, but I think I'll stick with what comes from these guys, and not listen to some marketing scam from some upstart guy running around bragging about himself to a bunch of kids........ Now blasterboy, I'm sure you'll come back with another outstanding post, and then tell us how you have to hit your books again, but let me put this idea in your head. Why don't you browse around on here a bit, and maybe try to learn something from the guys that are a level above you? Quote Link to comment Share on other sites More sharing options...
shee-gurg2k1 Posted April 16, 2004 Report Share Posted April 16, 2004 You must know quite a bit about porting, you have your own nationwide successful porting business right? What's it called by the way? Southtown (yes I figured out your dirty little secret), I find that extremely funny. So you're saying that you have to own a succesful nationwide business before you 'know' about porting? Shoot, I better go buy a chain of Subway's so I can learn how to make a sandwich. I would hardly call a guy who scams out his work to a few kids on a message board a "succesful nationwide business" And don't tell me you're ACTUALLY trying to compare God to carb rifling? speaking your unsurpassed knowledge and one sided opinions to all the inferior inexperienced adolesents that you can get to listen to your sorry cries, insulting everthing you don't understand or want to believe in That's some pretty big talk coming from a 19 year old... It appears to me that we understand things just fine. Perhaps, as Mullet~Boy said, you should crack open a book or two on two strokes and learn how things work before you start throwing your weight around as if you know what you're talking about. Quote Link to comment Share on other sites More sharing options...
MULLET~BOY Posted April 16, 2004 Report Share Posted April 16, 2004 i know quite a bit about porting yes but not near enough where i would start porting motors but from what hollywoods porting i can tell my knowledge far exceeds his hell aving ruff intakes was the first thing i rember reading about when i started learning about porting and this goon still hasn't figured out that smooth intakes couse the air fuel mixture to turn into globs and not burn well mabey one day he will learn ...but probably not Quote Link to comment Share on other sites More sharing options...
99LRDblaster Posted April 16, 2004 Report Share Posted April 16, 2004 i know quite a bit about porting yes but not near enough where i would start porting motors but from what hollywoods porting i can tell my knowledge far exceeds his hell aving ruff intakes was the first thing i rember reading about when i started learning about porting and this goon still hasn't figured out that smooth intakes couse the air fuel mixture to turn into globs and not burn well mabey one day he will learn ...but probably not i know quite a bit about porting yes but not near enough where i would start porting motors but from what hollywoods porting i can tell my knowledge far exceeds his hell aving ruff intakes was the first thing i rember reading about when i started learning about porting and this goon still hasn't figured out that smooth intakes couse the air fuel mixture to turn into globs and not burn well mabey one day he will learn ...but probably not a stock blaster has an autolube oil injection system which causes injection of the oil in the side of the carb. marc's carbs get rid of the O/I grommet to the line(unless you inform him otherwise) which makes you run premix. premix atomizes much better than the stock O/I kit ever does. secondly the fuel/oil mix has to pass through the reed cage and the reeds themselves which are moving at 133 times a second at 8000rpm. with the carb rifling by itself it makes the air more turbulent causing the flow of air to atomize the fuel/oil charge even more. another thing is even if the intakes are polished or left unpolished what is the point? how much of a percentage of the fuel/oil charge actually passes over that portion of the ports? I myself dont really care if it is rough or polished because i really see no great difference unless it is a 4 stroke. Quote Link to comment Share on other sites More sharing options...
Indubitably Posted April 16, 2004 Report Share Posted April 16, 2004 the little icon your using fits you good, I assume thats what your life consists of, masterbation? Whats wrong with wankin off? Quote Link to comment Share on other sites More sharing options...
shee-gurg2k1 Posted April 17, 2004 Report Share Posted April 17, 2004 a stock blaster has an autolube oil injection system which causes injection of the oil in the side of the carb. marc's carbs get rid of the O/I grommet to the line(unless you inform him otherwise) which makes you run premix. premix atomizes much better than the stock O/I kit ever does. secondly the fuel/oil mix has to pass through the reed cage and the reeds themselves which are moving at 133 times a second at 8000rpm. with the carb rifling by itself it makes the air more turbulent causing the flow of air to atomize the fuel/oil charge even more. another thing is even if the intakes are polished or left unpolished what is the point? how much of a percentage of the fuel/oil charge actually passes over that portion of the ports? I myself dont really care if it is rough or polished because i really see no great difference unless it is a 4 stroke. Who said anything about oil injection? Banshees don't have injectors, they run premix and you don't see any of the top builders polishing intakes or rifling carbs on them. The roughness isn't only about atomization it also creates a boundry layer of air which allows the incoming air/fuel charge to flow through faster. On the polished intake the air is probably flying around in every direction trying to get into the cylinder. That would explain why his super duper PD3 only puts out a few more ponies then stock. There is no way hollywood is going to get into the banshee business like he claims, these guys will laugh him out of business when they see his 'technique' Quote Link to comment Share on other sites More sharing options...
MULLET~BOY Posted April 17, 2004 Report Share Posted April 17, 2004 werd! Quote Link to comment Share on other sites More sharing options...
Cotton eyed Joe Posted April 17, 2004 Report Share Posted April 17, 2004 the little icon your using fits you good, I assume thats what your life consists of, masterbation? Whats wrong with wankin off? Quote Link to comment Share on other sites More sharing options...
MULLET~BOY Posted April 17, 2004 Report Share Posted April 17, 2004 lmao stan Quote Link to comment Share on other sites More sharing options...
Cotton eyed Joe Posted April 17, 2004 Report Share Posted April 17, 2004 I'm gonna apply at Pixar. Quote Link to comment Share on other sites More sharing options...
shee-gurg2k1 Posted April 17, 2004 Report Share Posted April 17, 2004 Nice Stan! You remember me? Quote Link to comment Share on other sites More sharing options...
biffdenman Posted April 17, 2004 Report Share Posted April 17, 2004 But Banshees are what we big boys grow into. You'll understand that one day, probably right about the time your balls decide to drop. Now blasterboy, I'm sure you'll come back with another outstanding post, and then tell us how you have to hit your books again, but let me put this idea in your head. Why don't you browse around on here a bit, and maybe try to learn something from the guys that are a level above you? I do have a banshee, and I guess your a level above me, how's that?, good luck in life with that smart a$$ attitude, what a bunch of idiots this site has, I understand why juvenile punks now hang out on message boards 24/7. They can't get laid. Yes college life is good, oh and shee-gurg, I took a visit to your homepage, man are you one funny looking ugly SOB, are you homosexual or something, looks as though you have a dildoe stuck up there, you looked in the mirror lately? If I was that stupid looking I would never show my face in public, you should also lay off on the cheese burgers, for a young kid, your pretty fat, oh and to the rest of you kids that think you know it all about it all, someday you'll think you know everything, but you still won't be getting laid If banshee's are a mans quad, then why do they have training wheels, I like my quads, but if your real men as you say, well, I mean boys, who wish they were men, why don't any of you have the balls to be on 2 wheels? My banshee's for sale and I'm buying a nice new CR250R, that's a man's machine there boys, no training wheels, just two wheels and takes quite a bit more skill than your banshee's, sometimes I'm sorry I ever switched to a quad from my RM250, you quad guys are a bunch a whiney, homo wheelchar racer wanna be's, now go get your little green icon, hand loction and box of tissues and fantisize about Brad Pitt, butt pirates Quote Link to comment Share on other sites More sharing options...
Cotton eyed Joe Posted April 17, 2004 Report Share Posted April 17, 2004 Nice Stan! You remember me? lol Yeah I amember you. You still have your banshee??? Quote Link to comment Share on other sites More sharing options...
42F67N Posted April 17, 2004 Report Share Posted April 17, 2004 I seen a carb rifling thread with fighting on martha stewart .com Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.