l0wrider Posted March 24, 2004 Report Share Posted March 24, 2004 i got the Vitos Banshee T.O.R.S. Eliminator Kit, It comes with the throttle cables, carb tops, idle kit and a couple other things. Do i need to put the springs and stuff on the car b tops when i get them??????? Quote Link to comment Share on other sites More sharing options...
svtkid78 Posted March 24, 2004 Report Share Posted March 24, 2004 if it comes with the springs put em on. can, hurt and its not hard. Quote Link to comment Share on other sites More sharing options...
banshdog Posted March 25, 2004 Report Share Posted March 25, 2004 I used the same kit. Yes you remove the cable from the handlebars down to the tors caps. then use your stock springs and connectors to replace the caps. also be sure to clean out you carbs real good after you drill and tap the idle screw holes. Quote Link to comment Share on other sites More sharing options...
l0wrider Posted March 25, 2004 Author Report Share Posted March 25, 2004 thanks banshdog. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.