Im-Loving-It 69 Posted March 20, 2004 Report Share Posted March 20, 2004 OK here's the deal, I have a set of 30mm Kenth carbs and when I turn the gas on it's fine but when start it up and turn it off gas starts dripping out the back of the carbs . I have a set of K&N's on the back of them now, but i don't know why they it is doing it, and its just the left carb, oh ya I pulled them off and cleand every thing out of them so I know they aren't dirty. PLEASE HELP ME WITH MY PROBLEM !!!! Quote Link to comment Share on other sites More sharing options...
ranshee Posted March 20, 2004 Report Share Posted March 20, 2004 Try tapping the carb with the back of a screw driver. Prolly a stuck float. Quote Link to comment Share on other sites More sharing options...
wesw Posted March 20, 2004 Report Share Posted March 20, 2004 adjust floats Quote Link to comment Share on other sites More sharing options...
geaux 4 it Posted March 20, 2004 Report Share Posted March 20, 2004 Make sure there is nothing behind the seat where the float needle allows fuel to enter in the bowl.I had a piece of rubber get stuck causing the float needle not to seal off ,leaking out the overflow and vent tubes. Quote Link to comment Share on other sites More sharing options...
Im-Loving-It 69 Posted March 20, 2004 Author Report Share Posted March 20, 2004 How do i adjust the float's Quote Link to comment Share on other sites More sharing options...
Otis Posted March 20, 2004 Report Share Posted March 20, 2004 How do i adjust the float's Jetting FAQ...Question #26 Quote Link to comment Share on other sites More sharing options...
illboogie Posted March 21, 2004 Report Share Posted March 21, 2004 you need to see if yur floaots are at the correct height Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.