Jump to content

Figured Out What Was Wrong With My Tranny


Recommended Posts

Sent my engine to Jim because I was do damn stupid to figure out what was wrong with it. Jim tore into it and told me that my 5th gear welded itself to the shaft and thats why it never had neutral. So now I need to buy a new shaft and 5th gear. Damn its never going to end. Jim said that in all his years he has never seen this happen before. He beat the hell out of it with a hammer and still didnt come off. We are overnighting the parts so hopfuly I can be on the road again by tuesday I hope. I need a little good luck or a donation pot so I can afford to keep fixing her haha.

Link to comment
Share on other sites

One of the banshee's I bought had the same problem.But I put mine in a press and luckly it came apart.Then I used a belt sander we use to use at cannondale and polished the shaft, then I used a stone for a die grinder, I don't remember wich one,and polished the gear.I put it all back together and it works fine.

Link to comment
Share on other sites

ust curious... what kind of trany oil were you running and did you have a coolnt leak into the tranny case? Do you have pics of the damaged parts?

I used Transoil sae 10w30 thats what the dealer told me was the best that they had. Jim at Passion told me to just use regular 10w30 or 10w40 engine oil like catrol gtx or somthing. When I drained the oil out of the case I didn't see any kind of coolent in the oil, it looked good. Jim said that the guy that I got the banshee from could have ran it low of oil for awhile and filled it up when I got it because I dont have much time on it.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...