stewie Posted March 4, 2004 Report Share Posted March 4, 2004 have been told rd350 barrel& heads are the go for maxin out yor banshee. is it true? i have 2 friends here with banshees who want to do it so i thort i ask u people. does anyone no where to get any rd350 parts is the big ? i spose. Quote Link to comment Share on other sites More sharing options...
pimp559 Posted March 4, 2004 Report Share Posted March 4, 2004 Do a long rod 370 and you'll be very happy. On top of that you'll be able to get parts alot easier and faster and probably a little cheaper. Quote Link to comment Share on other sites More sharing options...
Aussie Quad Racer Posted March 4, 2004 Report Share Posted March 4, 2004 you want the "rd350 ypvs" barrels and head(aka rz350). the none ypvs rd 350's had different stud pattern and old porting designs. But its not that simple. These cylinders have electronic controlled power valves and different exhaust mounts. I know this cause i have an rz350 as well as my banshee. To do the conversion properly you will need the following 1. Cylinders and head 2. CDI 3. Stator and flywheel 4. harness 5. powervalve control unit 6. powervalve motor and cables Quote Link to comment Share on other sites More sharing options...
Holyman Posted March 4, 2004 Report Share Posted March 4, 2004 I have a pair of Trinity Ported RZ jugs I'd sell for $350. They are ready for .050 pistons. Quote Link to comment Share on other sites More sharing options...
nater006 Posted March 4, 2004 Report Share Posted March 4, 2004 Dang.. would love to have those.. gotta buy the rest of the stuff too unfortunately (flywheel, stator, CDI) or I'd jump at that for a project... Quote Link to comment Share on other sites More sharing options...
Trick2stroke Posted March 4, 2004 Report Share Posted March 4, 2004 I was going to do it but Jim from passion racing told me to just use the stock banshee cylinders... I do plan however on still using the RZ shift forks and drum and the stator for the extra watts... Quote Link to comment Share on other sites More sharing options...
nater006 Posted March 4, 2004 Report Share Posted March 4, 2004 Yup. I want a set of those shift forks too. Read some stuff about those and how they improve the shifting and would love to do that mod.. if I could find a set Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.