gomer Posted March 3, 2004 Report Share Posted March 3, 2004 i have this post on several forums but i want all the input i can get i only have one chance to get it right how much do i need to cut out of the stock plate to get 4 degrees of advance and will i have to mess with my jetting i finally got it right and would hate to have to fool with it again for a while thanks alot Quote Link to comment Share on other sites More sharing options...
gomer Posted March 3, 2004 Author Report Share Posted March 3, 2004 some help please Quote Link to comment Share on other sites More sharing options...
2004LEBanshee Posted March 3, 2004 Report Share Posted March 3, 2004 There was a topic on here befor on this. I read it and tried it. What I was told to do was to move the hole to the left 4mm. One mm for every degree of advancement. No I didn't have to mess with jetting. Also rember to go to the left. The right will retard the timeing. Quote Link to comment Share on other sites More sharing options...
gomer Posted March 3, 2004 Author Report Share Posted March 3, 2004 what type of gain did u get was it really noticeable Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.