gbf4ever Posted February 11, 2004 Report Share Posted February 11, 2004 Is there a 30mm bolt and nut anytwhere on the banshee let me know Quote Link to comment Share on other sites More sharing options...
DUNEDEMON Posted February 12, 2004 Report Share Posted February 12, 2004 On the primary sprocket nut if I'm not mistaken. Quote Link to comment Share on other sites More sharing options...
cb67rs1 Posted February 12, 2004 Report Share Posted February 12, 2004 are you talking about the actual size of the bolt and nut, or are you refering to is there any bolt or nut that takes a 30mm socket or wrench to get off? Quote Link to comment Share on other sites More sharing options...
gbf4ever Posted February 12, 2004 Author Report Share Posted February 12, 2004 that takes a 30 mm socket to take off Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted February 12, 2004 Report Share Posted February 12, 2004 have to be the sprocket nut. i think the next size down from that would be either the hub nuts or swingarm nut. Quote Link to comment Share on other sites More sharing options...
Cotton eyed Joe Posted February 12, 2004 Report Share Posted February 12, 2004 There is also the 30mm "nut" that holds the steering stem bearing in. Quote Link to comment Share on other sites More sharing options...
frocashmoney24 Posted February 12, 2004 Report Share Posted February 12, 2004 what about the clutch nut Quote Link to comment Share on other sites More sharing options...
ruff_rida69 Posted February 12, 2004 Report Share Posted February 12, 2004 the clutch boss nut is bigger then 30mm because I when to a local hardware place and tryed to fit it and it was way to small I say it's probley a 33mm or 34mm but not sure Quote Link to comment Share on other sites More sharing options...
fixitrod Posted February 12, 2004 Report Share Posted February 12, 2004 I use an 1 1/4" on the sprocket and clutch if I remember right. It works fine. If that's about 30mm then I'd say for both. Why are you asking ? Quote Link to comment Share on other sites More sharing options...
rzcolobanshee Posted February 12, 2004 Report Share Posted February 12, 2004 Both sprocket and clutch nuts are 32mm, can get a socket at sears Quote Link to comment Share on other sites More sharing options...
jinx44 Posted February 12, 2004 Report Share Posted February 12, 2004 I'm with rz, I think they are 32's also. Quote Link to comment Share on other sites More sharing options...
Proquad101 Posted February 12, 2004 Report Share Posted February 12, 2004 I use an 1 1/4" on the sprocket and clutch if I remember right. It works fine. If that's about 30mm then I'd say for both. Why are you asking ? That is what I use. On my wheels I use a 9/16 that is the same thing as a 14mm. but if all else fails use a cressent wrench!! works good last long Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.