Atvrider_96 Posted January 20, 2004 Report Share Posted January 20, 2004 I need a new clutch can i have an opion on what you guys use. Which clutch do you think is the best. Quote Link to comment Share on other sites More sharing options...
spoin39 Posted January 20, 2004 Report Share Posted January 20, 2004 I use Barnett, but ebc and others are good. Soak the fiber plates in the tranny fluid for at least a few hours (if not all night) before you install them. Quote Link to comment Share on other sites More sharing options...
2001SSTBanshee Posted January 20, 2004 Report Share Posted January 20, 2004 Duncan- IMO the clutch pull on barnett is ridiculous, if you use all their springs. Quote Link to comment Share on other sites More sharing options...
fixitrod Posted January 20, 2004 Report Share Posted January 20, 2004 I have a barnett and it is stiffer. Some people just use three barnett springs and 3 stocker. The duncan is said to have the same pull... or close.. as the stock but grip very well. I've also heard someone say stock clutch is awesome if you replace 3 or all the springs with heavy duty. Just rough up the steals in between and buy the stock clutch plates. To each there own. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.