humilde Posted January 18, 2004 Report Posted January 18, 2004 how is the fastes way to sync the carbs , it a newbie here,please help. Quote
Schizo Posted January 18, 2004 Report Posted January 18, 2004 The way i sync the carbs is take the air filters off and look inside the carbs at the slides, adjust the idle screws on the top (stock carbs) untill the slide just seats on the bottom then turn the screws 1 full turn up for idle. Quote
spoin39 Posted January 19, 2004 Report Posted January 19, 2004 You mainly want them to go up and down at the exact same time. Watch them close when you just touch the throttle to see if they react at the same time and adjust accordingly. Quote
ledofthezep Posted January 19, 2004 Report Posted January 19, 2004 Get yourself a clymers manual. You won't regret it & it will walk you through specifically on how to sync the carbs. If you look at the slides you'll see each has a little bearing on it. Then look at the carbs, you'll see that each one has a little 'window' that you can look into. When the carbs are in sync the bearing should be visable in both windows at the same time. Just go & look and hopefully you'll see what I'm talking about. It's not hard to do at all. Quote
lincster Posted January 20, 2004 Report Posted January 20, 2004 What ledofthezep said, get a Clymers. Very good instructions. You only adjust the carb with the choke on it if you have to make any adjustments. Quote
gumby Posted January 21, 2004 Report Posted January 21, 2004 better yet get a 2into1 dont have to hassle with the bs Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.