2004LEBanshee Posted January 18, 2004 Report Share Posted January 18, 2004 I just took off my stock head does it have a gasket? I dont think I saw one. Also after haveing a head milled do I need to get one? Quote Link to comment Share on other sites More sharing options...
ruff_rida69 Posted January 18, 2004 Report Share Posted January 18, 2004 if you didn't have a head gasket you would of had some serious probems, its probley just stuck to the head or the cylinders, and yes always use a new gasket when you take your head off or your just askin for problems. Quote Link to comment Share on other sites More sharing options...
2004LEBanshee Posted January 18, 2004 Author Report Share Posted January 18, 2004 How much are they? Quote Link to comment Share on other sites More sharing options...
ruff_rida69 Posted January 18, 2004 Report Share Posted January 18, 2004 if you get on at the dealership there $20 bucks or you can order a cometic full top end gasket kit for around $21 bucks, I've always run cometic and never had any problems with them. Quote Link to comment Share on other sites More sharing options...
fixitrod Posted January 18, 2004 Report Share Posted January 18, 2004 I have been told by my builder to use stock head gastkets. I never had trouble with cometic but I did with the vitos gasket. Quote Link to comment Share on other sites More sharing options...
boonman Posted January 19, 2004 Report Share Posted January 19, 2004 You will need a Yamaha part # 2GU-11181-00 and it is around $20. From the dealer. I have used Cometics in the past. And I blew one. ALthough, my torque wrench contributed to this as well. I am on a stock head gasket, with no problems. I also bought a new torque wrench when I threw my old one through the wall. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.