deli sandwich Posted January 13, 2004 Report Share Posted January 13, 2004 hey, anyone know of any places that sell the orings for cheetah cylinder heads? I know i can get them direct from trinity but i'm not sure if its worth the hassle. Could i just reuse the ones i have now because they only have a few hours on them. Thanks another question, out of curiosity, what do you guys think this is worth: 2000 banshee 421 cheetah w/ promx port rz350 cases rz350 drum and forks trinity stage iv pipes 35mm carbs aluminum airbox w/ dual unifilters ricky stator shift pro detent modded shift star pro design timing plate terry cable thumb throttle cut trans (not override) +2+1 lonestar a-arms -1 lonestar swingarm +4 lonestar axle elka elite rear shock toomey radiator hiper tech carbon fiber rear wheels itp holeshot xcr all around wave rear rotor lonestar rear hubs alba radiator hoses Quote Link to comment Share on other sites More sharing options...
Meat Posted January 13, 2004 Report Share Posted January 13, 2004 hey wasnt Allpro Cycle a Trinity dealer. Who remembers AllPro Cycle ?? Quote Link to comment Share on other sites More sharing options...
00BANSHEE Posted January 13, 2004 Report Share Posted January 13, 2004 hey wasnt Allpro Cycle a Trinity dealer. Who remembers AllPro Cycle ?? lol, had him port my reed cages back in 2000. I paid him for some 30 pilots and they still haven't showed up. Hey deli, you should be able to reuse the o-rings if they still look good. Quote Link to comment Share on other sites More sharing options...
NYUK Posted January 13, 2004 Report Share Posted January 13, 2004 believe it or not brian is still around porting motors.sheeya gets a bunch of cylinders done by him.remember the pics of them cylinders he ported?that bike is still going strong same pistons,new rings this time last year.very very fast,he would be right on my ass every race. grand river racing is a trinity dealer also deli, andy has the o rings. Quote Link to comment Share on other sites More sharing options...
Meat Posted January 14, 2004 Report Share Posted January 14, 2004 hell yea there were a few other guys who had an Allpro port and the engine held together fine. He just had a few unhappy customers I guess Quote Link to comment Share on other sites More sharing options...
909 Posted January 17, 2004 Report Share Posted January 17, 2004 Hey Deli. Just so 'ya oughta know..... The o rings are there because they are reusable. Head gaskets are not. As long as they're not cut or pinched you can use them over and over 'till they break. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.