Amstaff Posted January 12, 2004 Report Share Posted January 12, 2004 i read that stock yfz a-arms will fit the banshee if modifyed does anyone know what needs to be done to the a-arms to do this? I was thinkin of gettin some yfz450 a-arms and shocks. what all will i need to do to them to get them to fit any help would be nice! thanx!!! Quote Link to comment Share on other sites More sharing options...
erbilabuc Posted January 13, 2004 Report Share Posted January 13, 2004 stretch the upper arm out about 1/2 inch and the bottom arm about 1 inch. Sounds simple doesnt it Quote Link to comment Share on other sites More sharing options...
Amstaff Posted January 13, 2004 Author Report Share Posted January 13, 2004 yes yes it does a lil too easy! thanx for the info!! Quote Link to comment Share on other sites More sharing options...
Amstaff Posted January 13, 2004 Author Report Share Posted January 13, 2004 one problem though how do i streatch out the top a arm when its comstructed like this it has a cross bar in it so it will not open up http://cgi.ebay.com/ebaymotors/ws/eBayISAP...item=2452716287 Quote Link to comment Share on other sites More sharing options...
Amstaff Posted January 13, 2004 Author Report Share Posted January 13, 2004 anyone? what do ya just put a spacer in the top? or what? Quote Link to comment Share on other sites More sharing options...
erbilabuc Posted January 13, 2004 Report Share Posted January 13, 2004 What I meant by my reply is that you would have to cut the arm and add 2 inches of metal to it therefore making it harder then it needs to be which would mean you are better off buying the proper arms from a company like LSR or Janseen Quote Link to comment Share on other sites More sharing options...
Amstaff Posted January 14, 2004 Author Report Share Posted January 14, 2004 thanx! guess the guy on ebay was full of crap! Quote Link to comment Share on other sites More sharing options...
erbilabuc Posted January 14, 2004 Report Share Posted January 14, 2004 I dont know, he might of actually done it and posted a different picture of the arm. I saw the auction you werte referring to and I asked him and all he could say was that the bottom arm was modified. I asked him how and he said he had it done by someone else. That right there made me leave the subject alone as i could smell BS Quote Link to comment Share on other sites More sharing options...
woodman Posted February 10, 2004 Report Share Posted February 10, 2004 He is right the bottom a arm has to modified. The half inch cut off the outside t mounts has to be welded on the inside or washers added. Quote Link to comment Share on other sites More sharing options...
Wassup350 Posted February 10, 2004 Report Share Posted February 10, 2004 I think it would be easier to just get good a-arms for a banshee that actually fit. Quote Link to comment Share on other sites More sharing options...
woodman Posted February 11, 2004 Report Share Posted February 11, 2004 Yes its easier Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.