Jump to content

Banshee mechanic


Recommended Posts

I’m out in Minnesota Looking for a super super good mechanic, reputable.
  I have a 1996 banshee, I had a shop do top end, bottom end, clutch, new chain, new heads and new cylinders. They can’t get bike started. I need to travel with bike or fly someone in, I would need you to know you stuff and know it well, with proof.

Link to comment
Share on other sites

10 hours ago, pc_55 said:

I’m out in Minnesota Looking for a super super good mechanic, reputable.
  I have a 1996 banshee, I had a shop do top end, bottom end, clutch, new chain, new heads and new cylinders. They can’t get bike started. I need to travel with bike or fly someone in, I would need you to know you stuff and know it well, with proof.

 

I'm in MN too, who did the work? Where in MN are you? I might be able to come look!

These things are simple as shit. You do NOT need to fly someone in, or travel  if you can't follow simple directions.

What happens when you try and kick it over?

Check to make sure it's getting fuel?

Link to comment
Share on other sites

Cannon power in cannon falls did the work, I was told it needed carbs adjusted, too much gas is getting into the spark plugs, put new spark plugs in and it won’t start, it try’s to kick over but won’t, then floods. Sorry im new to the banshee/4 wheeling world. Would pay you to come out or will drive in if you’re really knowledgeable I also have OEM carbs on the way just in case. I’m 15 away from cannon falls Minnesota. Thanks for your response.

Link to comment
Share on other sites

52 minutes ago, pc_55 said:

Cannon power in cannon falls did the work, I was told it needed carbs adjusted, too much gas is getting into the spark plugs, put new spark plugs in and it won’t start, it try’s to kick over but won’t, then floods. Sorry im new to the banshee/4 wheeling world. Would pay you to come out or will drive in if you’re really knowledgeable I also have OEM carbs on the way just in case. I’m 15 away from cannon falls Minnesota. Thanks for your response.

 

I'm in west metro Minneapolis, not too far from you.

 

What carbs are currently on it. Sounds like the floats aren't adjusted right. takes 10 minutes to do

 

I would NOT go back to Cannon Powersports. If they can't figure this out, they're clueless.

 

I could probably come out next week before Thursday. I'll send you a private message

Link to comment
Share on other sites

  • 3 weeks later...
On 8/22/2024 at 9:22 PM, pc_55 said:

I’m out in Minnesota Looking for a super super good mechanic, reputable.
  I have a 1996 banshee, I had a shop do top end, bottom end, clutch, new chain, new heads and new cylinders. They can’t get bike started. I need to travel with bike or fly someone in, I would need you to know you stuff and know it well, with proof.

The shop cant get the bike started after this? Are they fixing it for you? Do you have spark? 

  • Like 1
Link to comment
Share on other sites

   I just did a Motion Pro TORS delete kit with the idle screws on my banshee this past weekend. Just a little added information depending on the year of your banshee but on my 05 I had to unplug the TORS control unit that is located by the front fuel tank bolt on the left side (clutch lever side) to make my banshee run after doing the delete kit. I totally removed the control unit. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...