zR2 Posted January 1, 2004 Report Share Posted January 1, 2004 just curious on what a somewhat stock shee would run 1/4 mile asphalt check the signature for mods Quote Link to comment Share on other sites More sharing options...
cb67rs1 Posted January 1, 2004 Report Share Posted January 1, 2004 my buddy ran high 15's on his and he only had FMF SST's and slicks and k&n slip ons. he was also running slicks Quote Link to comment Share on other sites More sharing options...
Aussie Quad Racer Posted January 2, 2004 Report Share Posted January 2, 2004 i ran best time of 14.8 and 86.8 mph. Bike was jetted too rich and was 4stroking once it hit a certain rpm. will get it rejetted and have another go. My engine mods are in signature and note the exhaust port on my cylinders is completely standard. Quote Link to comment Share on other sites More sharing options...
Stuff Posted January 8, 2004 Report Share Posted January 8, 2004 When you guys run the 1/4 mile, you must be wound out well before the finish line, right? I guess what I am thinking is that gearing for a shee is very low compared to a street car and with higher gearing in the shee your times would be quicker with a higher top speed if low end is not compromize. You guys that race the 1/4 mile, what have you done for gearing if any. Just curious cuz my shee is stock and I ride trails mostly. Quote Link to comment Share on other sites More sharing options...
cb67rs1 Posted January 9, 2004 Report Share Posted January 9, 2004 i run 96mph in the 1/4 and stay in 5th , not really wound out. i have 17 / 39 gearing Quote Link to comment Share on other sites More sharing options...
01bansheefox Posted January 9, 2004 Report Share Posted January 9, 2004 cb, what are your engine mods? Quote Link to comment Share on other sites More sharing options...
Aussie Quad Racer Posted January 10, 2004 Report Share Posted January 10, 2004 New quarter time for me!!! raced last night. 14.1 first run 13.8 second 13.7 3rd and 4th run 13.6 5th run Quote Link to comment Share on other sites More sharing options...
big_block_banshee Posted January 14, 2004 Report Share Posted January 14, 2004 i run 1/8th mile wid 19/36 gearing and i am running out of gear. Quote Link to comment Share on other sites More sharing options...
cb67rs1 Posted January 15, 2004 Report Share Posted January 15, 2004 cb, what are your engine mods? Grand river racing pro port 38 mm TMX`s carbs V-Force reeds Grand river racing billet intakes .20 over stock bore Coolhead 18 cc domes Welded Hot Rods crank i was running shearer pipes but now i have power pros, i have to get it to the dyno to see how they work Quote Link to comment Share on other sites More sharing options...
cb67rs1 Posted January 15, 2004 Report Share Posted January 15, 2004 i run 1/8th mile wid 19/36 gearing and i am running out of gear. I call BS unless you have a motorcycle engine and pushing LOTS of horsepower, and where did you find a 36 rear sprocket? and a 19 front ? Quote Link to comment Share on other sites More sharing options...
big_block_banshee Posted January 15, 2004 Report Share Posted January 15, 2004 sorry cb67rs1, i hate to tell ya but its a stock cylinder 4 mill stroker banshee motor. on a stock frame Quote Link to comment Share on other sites More sharing options...
big_block_banshee Posted January 15, 2004 Report Share Posted January 15, 2004 oh yeah i have a honda hub conversion on the back it fits all the way down to a 33 tooth sprocket. sprocket specialist supplies me with the 19 for the front. Quote Link to comment Share on other sites More sharing options...
NYUK Posted January 15, 2004 Report Share Posted January 15, 2004 my man what kind of times you turn in the 8th, 60 ft 330 ft? Quote Link to comment Share on other sites More sharing options...
big_block_banshee Posted January 15, 2004 Report Share Posted January 15, 2004 mid 6`s in the 1/8th. cant remember the 60ft but it was arround in the 1:40`s i believe. Quote Link to comment Share on other sites More sharing options...
Southside Motorsports Posted January 25, 2004 Report Share Posted January 25, 2004 do you guys know of any good places to get some rear tires for street drags....also what hooks up the best ? and is it better to run a low profile or a fatter tire? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.