Yamaha banshee jetting help!!!

[Banshee_]

Hi, i need some help with my jetting!

 

my setup is 

toomey T5

oem carbs tors deleted

vforce 4

cylinders have a little work just cleaned up the rough sides raised exhaust a little not much

bored 65,25

Toomey uni filter 

stock airbox with the lit cut inside

no snorkle

mains jets 280

pilots 27,5

Toomey needles 4 groove from top

 At sealevel

i was wondering if my jetting is in the right direction or is it off 

what is seems to be i always need my choke to start the bike without it takes a few kicks with the choke it is like 1 or 2 kicks

before i put the the toomey needles in it took 1 kick without choke with stock needles but that was when i just rebuild the bike  so i dont know what the problem is we dont drive alot here in the netherlands due to wether

hope you guys can help me tho!!

 Many thanks

 

[hoppedupandcutdown]

That should be really close. You might try turning in the air screws a little.

Also, if it sits a lot and depending on the fuel quality, the pilot circuit might just need cleaned.