BansheeBrian Posted December 27, 2003 Report Share Posted December 27, 2003 You all know i like to investigate to the fullest when i do a mod. I recieved a pro design kill switch for christmas and want to eliminate the key. What wires do i twist together to make this happen? Quote Link to comment Share on other sites More sharing options...
NYUK Posted December 27, 2003 Report Share Posted December 27, 2003 disconnect the keyswitch. connect the two wires together,that simple. Quote Link to comment Share on other sites More sharing options...
evil Posted December 28, 2003 Report Share Posted December 28, 2003 you could even go as far as following it down to the plug and clipping the wires above the white plastic plug and splicing those togather then removing the plug as a deterent when your stopped at the baffroom or at night. Quote Link to comment Share on other sites More sharing options...
Cotton eyed Joe Posted December 28, 2003 Report Share Posted December 28, 2003 you could even go as far as following it down to the plug and clipping the wires above the white plastic plug and splicing those togather then removing the plug as a deterent when your stopped at the baffroom or at night. I have a hidden rocker switch on my banshee this way. So when I roll on in to the shitters, I play like I'm turning off my fuel, and all I do is bump this switch and presto!!! I'm kicking it like a mad man when I get out because I forgot I switched it off sometimes. Quote Link to comment Share on other sites More sharing options...
BansheeBrian Posted December 28, 2003 Author Report Share Posted December 28, 2003 That all sounds good. I just dont want the kill switch to be the only way to start it.Someone could jam thier dentures,stick,stone or wedding band in there and split with my ride. I like the ground switch idea underneath. Nice touch. Quote Link to comment Share on other sites More sharing options...
Cotton eyed Joe Posted December 28, 2003 Report Share Posted December 28, 2003 That all sounds good. I just dont want the kill switch to be the only way to start it.Someone could jam thier dentures,stick,stone or wedding band in there and split with my ride. I like the ground switch idea underneath. Nice touch. Put it somewhere where you know no one will find it, but you can still access it. Mine can barely be touched by my fingers if I grab the frame near the gas tank. There are a couple different places to stick one, just make sure it isn't too obvious thats what you are shutting off if people are looking. All you would have to do is stand the bike on its grab bar to find the switch. Quote Link to comment Share on other sites More sharing options...
bronco91shee Posted January 3, 2004 Report Share Posted January 3, 2004 its a red wire that goes to the rear of the shee, and a bk/red or bk/white wire that comes from the handlebars. Thats all i did. My friend ought me that one. Later on i found out the reason he did it to "his". he stole the damn thing! He was arrested, and the guy got it bac, but i still think he is a dumbass. peace out Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.