98modifiedblaster and 97banshee Posted December 25, 2003 Report Share Posted December 25, 2003 hey i just got my motor back and i bored it 20 over and had it ported. i had 280 jets in it and it would not revv at all. then i put my stock jets in and it would idle really good but still it wouldnt rev. so i dont have a clue with what is wrong, also i am running stock carbs cause i cant afford new ones right now, so any help would be greatly appreciated Quote Link to comment Share on other sites More sharing options...
98modifiedblaster and 97banshee Posted December 25, 2003 Author Report Share Posted December 25, 2003 i forgot to put that i had my reed cages ported also. also where is the pilot jet at. Quote Link to comment Share on other sites More sharing options...
Banchetta Posted December 27, 2003 Report Share Posted December 27, 2003 Go to a 320 mains, lid off, and do a wot run in 6th gear and see what color the plugs are......let us know.... Quote Link to comment Share on other sites More sharing options...
spoin39 Posted December 27, 2003 Report Share Posted December 27, 2003 The pilot is under the main jet splash guard. Quote Link to comment Share on other sites More sharing options...
98modifiedblaster and 97banshee Posted December 27, 2003 Author Report Share Posted December 27, 2003 ok i finally got it running the people that had it before me said they unhooked the rev limited switch coming from the clutch and i went to check last night and it was still hooked up so i unhooked it and it is now running im goin to go buy some new jets and a 30 pilot and i will let everyone now how it turns out thanksfor the help. Matt Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.