Critchy87 Posted June 20, 2022 Report Share Posted June 20, 2022 (edited) Hi I purchased a banshee second hand was told it was a stroker motor. Just pulled the stock head it has 795 65mm wiseco pistons. The jugs appear to be aftermarket as they say fmf on the side. Problem I’m having is when piston is at tdc the only thing coming out of head is the domed part of piston none of the side wall comes out I was under the assumption a small amount of the side wall was suppose to come out of the cylinder as well with a stroker . No spacer. Stock head didn’t appear to have any work to it either. Question now is am I suppose to run stroker domes or just stock domes just don’t want to ruin anything . I’m switching to a chariot head . Thanks for help Edited June 20, 2022 by Critchy87 Quote Link to comment Share on other sites More sharing options...
Critchy87 Posted June 20, 2022 Author Report Share Posted June 20, 2022 Coming out of the cylinder didn’t mean to say head sorry Quote Link to comment Share on other sites More sharing options...
Critchy87 Posted June 21, 2022 Author Report Share Posted June 21, 2022 I figured it out fmf head is taller than stock it’s a long rod stroker with 795 pistons just can run any stock dome on. Sorry for wasting your all’s time Quote Link to comment Share on other sites More sharing options...
specialblend07 Posted June 21, 2022 Report Share Posted June 21, 2022 15 hours ago, Critchy87 said: Sorry for wasting your all’s time Thank you. We are all very busy. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.