GoatHzb Posted December 19, 2021 Report Share Posted December 19, 2021 I have a banshee with toomey t6 and I just recently put K&N pods on it it used to be kinda hard to start now it won’t start at all unless I push it in 1st and pop the clutch then it slowly starts but won’t idle for more than 1 second ever since I put the pods on I have to stay on the gas or it dies and it pops like a gun shot every once in a while from the exhaust I thought it was the tors system or either the jetting it still has tors on at the moment and I tried adjusting the air and idle screw but won’t get better what whould be the problem ? Quote Link to comment Share on other sites More sharing options...
GoatHzb Posted December 19, 2021 Author Report Share Posted December 19, 2021 It starts right up first kick when it dies if I let off the gas but I have to give it throttle when I kick it Quote Link to comment Share on other sites More sharing options...
375hp banshees Posted December 19, 2021 Report Share Posted December 19, 2021 You rejet ? Pilots to lean ( probably main too) Sounds like you were on the verge of a lean pilot before pods & now its worse. ...assuming you dont have other unrelated problems ie air leak, not idled up high enough... Quote Link to comment Share on other sites More sharing options...
caleb90 Posted December 19, 2021 Report Share Posted December 19, 2021 Lean.... Or possibly low compression Quote Link to comment Share on other sites More sharing options...
GoatHzb Posted December 19, 2021 Author Report Share Posted December 19, 2021 No I haven’t rejetted it I didn’t think it was nesassary at the time and I’ve never done it before Quote Link to comment Share on other sites More sharing options...
hoppedupandcutdown Posted December 19, 2021 Report Share Posted December 19, 2021 Do you know the current jetting? Was it jetted for the Toomey pipes? Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted December 20, 2021 Report Share Posted December 20, 2021 Definitely lean. Stock carbs? Probably still has the 25 pilots in it. You need 27.5 pilots. Quote Link to comment Share on other sites More sharing options...
GoatHzb Posted December 20, 2021 Author Report Share Posted December 20, 2021 26 minutes ago, locogato11283 said: Definitely lean. Stock carbs? Probably still has the 25 pilots in it. You need 27.5 pilots. Yes it has stock carbs it was rejetted when I got my t6pipes with tommey jet kit Quote Link to comment Share on other sites More sharing options...
GoatHzb Posted December 20, 2021 Author Report Share Posted December 20, 2021 8 hours ago, hoppedupandcutdown said: Do you know the current jetting? Was it jetted for the Toomey pipes? No I don’t all I know is it was jetted with the toomey t6 kit Quote Link to comment Share on other sites More sharing options...
MarineNYC Posted December 20, 2021 Report Share Posted December 20, 2021 Def needs jets. With a similar set up I was around a 300 main and a 27.5 pilot at sea level. Those filters are making it breathe. Is this going from Uni filters to K&N or did you just remove the airbox and installed pods for the 1st time?Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
GoatHzb Posted December 20, 2021 Author Report Share Posted December 20, 2021 4 hours ago, MarineNYC said: Def needs jets. With a similar set up I was around a 300 main and a 27.5 pilot at sea level. Those filters are making it breathe. Is this going from Uni filters to K&N or did you just remove the airbox and installed pods for the 1st time? Sent from my iPhone using Tapatalk Yes my air box had a crack in it so I just removed it and installed K&N pods Quote Link to comment Share on other sites More sharing options...
GoatHzb Posted December 20, 2021 Author Report Share Posted December 20, 2021 So what size jets should I go with? At the moment I have the toomey t6 jet kit Quote Link to comment Share on other sites More sharing options...
MarineNYC Posted December 20, 2021 Report Share Posted December 20, 2021 We literally just told you. Anywhere from a 280-300 Main and right around a 27.5 pilot. It’s impossible for us to jet your bike for you. We are giving you a round about. But the fact that you removed your airbox and put pods is why it’s running like shit. You are running lean AF right now. Too much air and not enough fuel. Sent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted December 20, 2021 Report Share Posted December 20, 2021 Are you running the Toomey needle? If so, I’d get rid of it and go back to stock. 27.5 pilot. Needle clip in middle. 280-300 main. Quote Link to comment Share on other sites More sharing options...
caleb90 Posted December 20, 2021 Report Share Posted December 20, 2021 Air screw 1.5 turns out to start Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.