Metal_man_Rob Posted April 3, 2021 Report Share Posted April 3, 2021 Does anybody have these? Need some tips on installing.If you have pictures that would be great. Few questions: What goes where?Do the heim joints go all the way in?Do you have pics? Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Big Mike NY Posted May 2, 2021 Report Share Posted May 2, 2021 Quote Link to comment Share on other sites More sharing options...
Big Mike NY Posted May 2, 2021 Report Share Posted May 2, 2021 Quote Link to comment Share on other sites More sharing options...
Metal_man_Rob Posted May 2, 2021 Author Report Share Posted May 2, 2021 Star with the forward heim joint all of the way in and the rear heim joint at about 6 turns out. That should be a decent starting point to set your caster. I set mine at 4 degrees. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Metal_man_Rob Posted May 2, 2021 Author Report Share Posted May 2, 2021 Star with the forward heim joint all of the way in and the rear heim joint at about 6 turns out. That should be a decent starting point to set your caster. I set mine at 4 degrees. Sent from my iPhone using TapatalkOh dear god I am answering my own post. Well this is awkward. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
375hp banshees Posted May 2, 2021 Report Share Posted May 2, 2021 10 hours ago, Metal_man_Rob said: Oh dear god I am answering my own post. Well this is awkward. Sent from my iPhone using Tapatalk Well you are from Ca. So... Quote Link to comment Share on other sites More sharing options...
Metal_man_Rob Posted May 2, 2021 Author Report Share Posted May 2, 2021 Well you are from Ca. So...Where did you get that? Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
375hp banshees Posted May 2, 2021 Report Share Posted May 2, 2021 Kinda obvious...isn't itSent from my SM-A505U using Tapatalk Quote Link to comment Share on other sites More sharing options...
Metal_man_Rob Posted May 2, 2021 Author Report Share Posted May 2, 2021 I guess. But I’m not from California. Either way, shit happens. Like California and joe biden Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
375hp banshees Posted May 2, 2021 Report Share Posted May 2, 2021 Speaking of, you get yourpile done yet?Sent from my SM-A505U using Tapatalk Quote Link to comment Share on other sites More sharing options...
Metal_man_Rob Posted May 2, 2021 Author Report Share Posted May 2, 2021 Speaking of, you get yourpile done yet?Sent from my SM-A505U using TapatalkGetting there. Had a bad coil so was chasing my tail with tuning. Stator, pickup and secondary were all good but the primary was reading way over spec and I was getting almost no spark on one side. Put the new OEM coil on yesterday and spark is really strong. Went back to stock reeds and gave the VF4s to a friend. Put a new pro flow adapter on (the old one was a shit show). Got the a arms done and my Elka shocks will be here Tuesday. Going to be putting the new tires on and running the elkas for a bit and see what I want done to them, if anything.Trying to figure out what roundhouse swinger I want. Stock swingers are the worst design ever. I like the lone star ones. After that it will be the motor. Staying stock since I’m running stock intake and exhaust but going with a clean up port job, wiseco pistons, cool head with stock size domes, gearbox and clutch overhaul and a welded and trued crank. Then I’ll have an expensive pile of that I’ll never get my money back on. Still about a year to go, I’d say. I need to start answering some of my other posts. HahaSent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
kawa110 Posted May 18, 2021 Report Share Posted May 18, 2021 Fireball swing armSent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Metal_man_Rob Posted May 29, 2021 Author Report Share Posted May 29, 2021 Fireball swing armSent from my iPhone using TapatalkI like the fireball arm. It’s an awesome deal, IMO. Comes with everything. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.