Jump to content

Power wheelie problem


Recommended Posts

Has anyone here ever had their banshee lose power after doing a power wheelie in 3rd or 4th gear?

Ive noticed this problem with my banshee. If I pulled a 3rd gear or 4th gear wheelie, it would sound weird and loses power after a few seconds of having the front end up. It feels just like ive fouled a plug/ lost a cylinder but both cylinders are still running (smoke still comes about of both silencers equally). When that happens, I just bring the front end down and run and rev the bike for a bit and it goes back to normal. This only happens during a high speed wheelie. It doesnt happen when I wheelie in first or second gear. 

The bike also runs perfect on four wheels in all gears. No bogs or sputtering.

My modifications : 

- Toomey T5

- Closed airbox with k&n filter. No snorkel.

- +4 timing advance

 - Vforce 4s 

- main jet : 280

- pilot jet : 27.5

- dynojet needles on the 4th clip

- air screws at 1 1/2 turns

- floats are set at 21mm. I doubled checked with a digital caliper.

Any idea on what the issue could be? Im lost since the bike runs perfect on four wheelies and only acts weird when the front wheels come up. 

 

 

Edited by Thenewguyonhere
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...