Ownartifact Posted February 11, 2021 Report Share Posted February 11, 2021 Is there anything special I have to do to put 392 athena cylinders on my bottom end I got a stock stroke hot rod crank in the bottom end Quote Link to comment Share on other sites More sharing options...
Keno Posted February 11, 2021 Report Share Posted February 11, 2021 Don't get Athena cylinders. Driveline are better http://www.drivelineperformance.com You will have to call them or email them to order the cylinders. Another option is to send your stock cylinders to Redline Racing to be ported. Stock ported are producing same or better than the Athena's these days.http://redlineracing.biz/services/porting/But to answer your question, 392 kits typically are meant for stock cranks, so just bolt it on and check squish. Quote Link to comment Share on other sites More sharing options...
Ownartifact Posted February 11, 2021 Author Report Share Posted February 11, 2021 I have aftermarket crank it’s just oem stroke Quote Link to comment Share on other sites More sharing options...
Keno Posted February 11, 2021 Report Share Posted February 11, 2021 Yeah, by oem I meant stock stroke 110mm rod. Quote Link to comment Share on other sites More sharing options...
Ownartifact Posted February 14, 2021 Author Report Share Posted February 14, 2021 Oh ok so what kind of crank would I need and I heard if you get anything bigger than a 392 kit you got to bore the bottom end is that true Quote Link to comment Share on other sites More sharing options...
Keno Posted February 14, 2021 Report Share Posted February 14, 2021 Your crank is fine Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.