Metal_man_Rob Posted February 7, 2021 Report Share Posted February 7, 2021 Didn’t even notice this til I stood the bike up to clean the bottom up, inspect, and put the collection chambers/springs back on. It appears these bikes run two chain rollers as well as a poly/nylon rolling sleeve that the chain rides on which is placed around the left side swing arm seal. Is that correct?Both rollers, if that is the case, have been reduced to bare bearings. The swing arm sleeve thing is also pretty wrecked.Wondering if there are better options. Pictures are great, if you have them. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Keno Posted February 8, 2021 Report Share Posted February 8, 2021 TM Designworks rollers have lasted me pretty well. Quote Link to comment Share on other sites More sharing options...
Metal_man_Rob Posted February 8, 2021 Author Report Share Posted February 8, 2021 Just now, Keno said: TM Designworks rollers have lasted me pretty well. Thanks Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted February 8, 2021 Report Share Posted February 8, 2021 I run TM on everything.. https://www.ebay.com/itm/TM-Designworks-Slide-N-Guide-Kit-Black-Chain-Guide-Kit-Yamaha-Banshee-350/140617516178?fits=Make%3AYamaha&hash=item20bd750492:g:ptgAAOSwz~pZ~1Dn Quote Link to comment Share on other sites More sharing options...
kawa110 Posted February 8, 2021 Report Share Posted February 8, 2021 ^^^this cascade/modquad swingarm slider and chain guide are nice as well. DRW case saver! avoid nylon chain wheels( they dry and become brittle) I like HIgh density poly wheels 1 Quote Link to comment Share on other sites More sharing options...
ATV_hub Posted February 9, 2021 Report Share Posted February 9, 2021 Tm designworks slide, guide and rollers, Drw case saver, tried and tested. Best on the market imo 1 Quote Link to comment Share on other sites More sharing options...
Metal_man_Rob Posted February 9, 2021 Author Report Share Posted February 9, 2021 Thanks, guys. I ordered some new rollers for now but have to slow down on purchases. But definitely going to grab the TM kit. So the previous owner brought in the service receipts today to show the swingarm guide was new and the swingarm bearings are all new. The rollers were new and the rear guide is new. What a bunch of garbage they put on this bike. The shit looks like it's been on there for 20 years! The TM front guide, does the swingarm come off to install that or does it split on the end to allow for opening to slip on the swingarm? I am thinking i need to take the swingarm off and see what other shit job the old owners "service tech" did. Quote Link to comment Share on other sites More sharing options...
sycoticbanshee00 Posted March 4, 2021 Report Share Posted March 4, 2021 I like the 42mm UPP racing rollers, really well built, they also make a good chain slider and guide, I recommend them. Quote Link to comment Share on other sites More sharing options...
bigdave_185 Posted April 26, 2021 Report Share Posted April 26, 2021 Thanks, guys. I ordered some new rollers for now but have to slow down on purchases. But definitely going to grab the TM kit. So the previous owner brought in the service receipts today to show the swingarm guide was new and the swingarm bearings are all new. The rollers were new and the rear guide is new. What a bunch of garbage they put on this bike. The shit looks like it's been on there for 20 years! The TM front guide, does the swingarm come off to install that or does it split on the end to allow for opening to slip on the swingarm? I am thinking i need to take the swingarm off and see what other shit job the old owners "service tech" did. You will have to pull the swing arm bolt to get that portion onSent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
Lowflyin Posted April 28, 2021 Report Share Posted April 28, 2021 I run a modquad slider , drw saver and TM guide. Seems like a good setupSent from my LM-V350 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Metal_man_Rob Posted May 2, 2021 Author Report Share Posted May 2, 2021 On 4/25/2021 at 9:15 PM, bigdave_185 said: You will have to pull the swing arm bolt to get that portion on Sent from my iPhone using Tapatalk Oh yeah, I forgot about this post. Don't really use this site much now. I had to cut the swing arm out but all of that is good now. Thanks, tho. Quote Link to comment Share on other sites More sharing options...
caleb90 Posted May 2, 2021 Report Share Posted May 2, 2021 43 minutes ago, Metal_man_Rob said: Oh yeah, I forgot about this post. Don't really use this site much now. I had to cut the swing arm out but all of that is good now. Thanks, tho. quiter Quote Link to comment Share on other sites More sharing options...
Metal_man_Rob Posted May 5, 2021 Author Report Share Posted May 5, 2021 On 5/2/2021 at 6:33 PM, caleb90 said: quiter LOL, no just been enjoying warm weather, man. I also don't have many questions that haven't already been asked. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.