239banshee Posted December 15, 2003 Report Share Posted December 15, 2003 i have just put a set of t6 on,before i start the bike what do i do so they wont blue Quote Link to comment Share on other sites More sharing options...
banshee tuner Posted December 15, 2003 Report Share Posted December 15, 2003 I have heard you can wipe them down with alcohol and get the oil from your skin off them but i don't beleive that one. The only way i know for sure is to jet really rich and not get the hole power gain of the pipe. That comes straight from the toomey website. Quote Link to comment Share on other sites More sharing options...
BansheeBrian Posted December 15, 2003 Report Share Posted December 15, 2003 Bluing is from being lean on your jetting. Things are getting a little too hot in your engine and the exhaust gas is causing the blue effect. You may need to beef up your mains 1-2. Quote Link to comment Share on other sites More sharing options...
mercado111 Posted December 15, 2003 Report Share Posted December 15, 2003 You can use some high temp paint inside of your pipes to help prevent bluing. Just spray and let dry, maybe two coats, and your ready. Seen an article in dirt wheels a couple years back on this. I have used it on my shee and have not had any bluing. You can get high temp spray paint at any auto parts store. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.