BansheeUSA Posted January 3, 2021 Report Share Posted January 3, 2021 I have a 397cc 4 mil banshee which I have changed the domes to 22cc and I can’t get it to run like it should. mods are 66mm 795piston, 4mil long rod crank, Cel Needle middle clip, running 33 keihins. I am at 250 above sea level. The compression sits around 175. What gas should I also be running because I tried 93 and it was not performing well. I am willing to give any information on the bike. Just want it to run as it should and compete. Quote Link to comment Share on other sites More sharing options...
ATV_hub Posted January 3, 2021 Report Share Posted January 3, 2021 Did you get the correct cut domes? Was it running fine before the dome swap? 175 is too high for pump gas, you are at risk of detention 1 Quote Link to comment Share on other sites More sharing options...
ClaudeMachining Posted January 3, 2021 Report Share Posted January 3, 2021 I have a 397cc 4 mil banshee which I have changed the domes to 22cc and I can’t get it to run like it should. mods are 66mm 795piston, 4mil long rod crank, Cel Needle middle clip, running 33 keihins. I am at 250 above sea level. The compression sits around 175. What gas should I also be running because I tried 93 and it was not performing well. I am willing to give any information on the bike. Just want it to run as it should and compete.Do a uccr test.Envoyé de mon SM-N975W en utilisant Tapatalk Quote Link to comment Share on other sites More sharing options...
BansheeUSA Posted January 3, 2021 Author Report Share Posted January 3, 2021 2 hours ago, ClaudeMachining said: Do a uccr test. Envoyé de mon SM-N975W en utilisant Tapatalk What is a UCCR test Quote Link to comment Share on other sites More sharing options...
BansheeUSA Posted January 3, 2021 Author Report Share Posted January 3, 2021 3 hours ago, ATV_hub said: Did you get the correct cut domes? Was it running fine before the dome swap? 175 is too high for pump gas, you are at risk of detention Yes the domes before was running great but I was tired of running 115+ octane gas. Cost to much where I am. What octane do you suggest me using. That maybe the problem I am having. With the last domes the compression was 210 it only ran great when I used c12 which is around 100 for 5 gallon here. Quote Link to comment Share on other sites More sharing options...
ATV_hub Posted January 3, 2021 Report Share Posted January 3, 2021 We’re the domes you got cut for a big bore stroker? Quote Link to comment Share on other sites More sharing options...
ATV_hub Posted January 3, 2021 Report Share Posted January 3, 2021 Just now, ATV_hub said: We’re the domes you got cut for a *66mm bore stroker? Quote Link to comment Share on other sites More sharing options...
ATV_hub Posted January 3, 2021 Report Share Posted January 3, 2021 1 hour ago, BansheeUSA said: What is a UCCR test Uncorrected compression ratio Quote Link to comment Share on other sites More sharing options...
gusto Posted January 3, 2021 Report Share Posted January 3, 2021 Get new domes for running pump gas. You still have too much compression. Driveline sells domes for a great price, tell them what you have and they’ll set you up. Quote Link to comment Share on other sites More sharing options...
the boris Posted January 3, 2021 Report Share Posted January 3, 2021 Wow, 175psi, that's very high. How accurate is your compression tester?Sent from my VOG-L29 using Tapatalk Quote Link to comment Share on other sites More sharing options...
BansheeUSA Posted January 4, 2021 Author Report Share Posted January 4, 2021 4 hours ago, ATV_hub said: We’re the domes you got cut for a big bore stroker? Yes the domes are perfect fit and are cut correctly. Quote Link to comment Share on other sites More sharing options...
BansheeUSA Posted January 4, 2021 Author Report Share Posted January 4, 2021 1 hour ago, the boris said: Wow, 175psi, that's very high. How accurate is your compression tester? Sent from my VOG-L29 using Tapatalk Hey I will test it once again tomorrow. My compression tester is very accurate. With that compression what should I be running gas wise. Quote Link to comment Share on other sites More sharing options...
the boris Posted January 4, 2021 Report Share Posted January 4, 2021 https://www.bansheehq.com/forums/index.php?/topic/117142-some-high-compression/Sent from my VOG-L29 using Tapatalk Quote Link to comment Share on other sites More sharing options...
ATV_hub Posted January 4, 2021 Report Share Posted January 4, 2021 9 hours ago, BansheeUSA said: Hey I will test it once again tomorrow. My compression tester is very accurate. With that compression what should I be running gas wise. As Claude suggested it really depends more on your compression ratio rather than cranking compression. But your high compression does indicate you possibly still need race fuel or at least a mix. Call whoever built your engine or another builder. https://www.bansheehq.com/forums/index.php?/topic/159299-uccr/ Quote Link to comment Share on other sites More sharing options...
BansheeUSA Posted January 4, 2021 Author Report Share Posted January 4, 2021 13 minutes ago, ATV_hub said: As Claude suggested it really depends more on your compression ratio rather than cranking compression. But your high compression does indicate you possibly still need race fuel or at least a mix. Call whoever built your engine or another builder. https://www.bansheehq.com/forums/index.php?/topic/159299-uccr/ Hey is their a way I can calculate the compression ratio on the build I have ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.