Jackham Posted December 17, 2020 Report Share Posted December 17, 2020 First off all I was out riding on the roads and it was running fine taking it easy but when you give it lots of gas it splutters so took it back home thinking it was too lean. As I went to check plugs I could just unscrew them with my fingers. ( i have had them unscrew all way out while riding before). I then noticed the plugs where too rich? What could be the problem? Banshee 42120cc domes 34mm Keihin carbs V force 3 Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Tedder Posted December 17, 2020 Report Share Posted December 17, 2020 Plugs backing out is always an indication of detonation and will likely lead to motor damage if the problems not corrected. Quote Link to comment Share on other sites More sharing options...
SKEETER Posted December 17, 2020 Report Share Posted December 17, 2020 Trinity makes a plug lock, that will be the best way to keep them from coming out during detonation. Quote Link to comment Share on other sites More sharing options...
sangheraent Posted December 20, 2020 Report Share Posted December 20, 2020 The better thing to do is to use higher octane fuel or have your domes cut to your fuel specs. Or what I did when I was young and poor was put locktight on the plugs. Quote Link to comment Share on other sites More sharing options...
ClaudeMachining Posted December 20, 2020 Report Share Posted December 20, 2020 No bueno.Envoyé de mon SM-N975W en utilisant Tapatalk Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted December 26, 2020 Report Share Posted December 26, 2020 That MFer isn't rich if it's backing plugs out. Quote Link to comment Share on other sites More sharing options...
the boris Posted December 31, 2020 Report Share Posted December 31, 2020 First off all I was out riding on the roads and it was running fine taking it easy but when you give it lots of gas it splutters so took it back home thinking it was too lean. As I went to check plugs I could just unscrew them with my fingers. ( i have had them unscrew all way out while riding before). I then noticed the plugs where too rich? What could be the problem? Banshee 42120cc domes 34mm Keihin carbs V force 3 Sent from my iPhone using TapatalkGo to 21cc domes or to higher octane fuel. Sent from my VOG-L29 using Tapatalk Quote Link to comment Share on other sites More sharing options...
the boris Posted December 31, 2020 Report Share Posted December 31, 2020 BTW what's the compression? Sent from my VOG-L29 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Jackham Posted January 2, 2021 Author Report Share Posted January 2, 2021 155psi each side Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
the boris Posted January 2, 2021 Report Share Posted January 2, 2021 155psi each side Sent from my iPhone using TapatalkYou might either try some race gas or go to bigger size domes.155psi is high compression for standard gas I suppose. Sent from my VOG-L29 using Tapatalk Quote Link to comment Share on other sites More sharing options...
the boris Posted January 2, 2021 Report Share Posted January 2, 2021 Is this your first 2 stroke? Sent from my VOG-L29 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Jackham Posted January 2, 2021 Author Report Share Posted January 2, 2021 Think I’ve sorted it I put octane booster with 99 Ron as that’s the highest we have in the uk and no plugs have come out yetSent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Jackham Posted January 2, 2021 Author Report Share Posted January 2, 2021 And I moved the clip up one on the needle and now it does not splutter or bog out. What a difference moving clip on the needle makes. WOWSent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
the boris Posted January 2, 2021 Report Share Posted January 2, 2021 And I moved the clip up one on the needle and now it does not splutter or bog out. What a difference moving clip on the needle makes. WOWSent from my iPhone using TapatalkDoes that mean it was lean in the top range? Sent from my VOG-L29 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Tedder Posted January 3, 2021 Report Share Posted January 3, 2021 As you raise the clip it drops the needle into the main jet which leans it. The site has some great reads on jetting: What Is Jetting - A Great How-to Article. - Jetting & Exhaust Forum - Banshee HQ Forums Banshee Jetting FAQ (dfn.com) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.