seansy007 Posted June 7, 2021 Report Share Posted June 7, 2021 that sucks about them not telling you... when I was building my engine with my good trans that i sent off to have pro mod done by macdaddy, (new shift forks and bearings even though all were fine) i had a tough time down shifting on the bench, looked at it and the only thing i could tell was that there was play in the shift shaft "ears that engaged on the shift star. so i bought a new shift shaft, spring, collar and modded the shift shaft to get more throw, no more problems with shifting down. although I haven't gotten my cylinders back yet from redline so i couldn't tell ya on rideability... Quote Link to comment Share on other sites More sharing options...
bigdave_185 Posted June 19, 2021 Author Report Share Posted June 19, 2021 Got my seat from cascade this past week Ribbed for her pleasure end mine! Also got my carbs drilled and taped for idle screws and those are installed. Need to adjust them a little more but otherwise I think it’s about ready to rip minus my wire harness from kevin @ Texas banshee. I aight to go check my tracking number lol Need to mod my stator so I can run it DC! Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
bigdave_185 Posted June 28, 2021 Author Report Share Posted June 28, 2021 Seat wrapped up so nice Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
bigdave_185 Posted June 29, 2021 Author Report Share Posted June 29, 2021 Floated the stator tonight, followed South Texas Banshees video. She cleaned up good and back installed Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
bigdave_185 Posted June 29, 2021 Author Report Share Posted June 29, 2021 After the break down I followed the video instructions and put it all back together Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
ClaudeMachining Posted June 29, 2021 Report Share Posted June 29, 2021 Now, all you need is this and a little capacitor if you dont want the flickering.Envoyé de mon SM-N975W en utilisant Tapatalk Quote Link to comment Share on other sites More sharing options...
bigdave_185 Posted July 2, 2021 Author Report Share Posted July 2, 2021 Kevin’s kit and wire harness comes with all that good stuff!! Sent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
bigdave_185 Posted July 2, 2021 Author Report Share Posted July 2, 2021 Sorry I didn’t mention it. I ordered south Texas banshees battery kit for the banshee, hooked me up with a light tag for a flag, some undercarriage lights, head lights and switches and the works. Pumped to get going on it! Sent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
bigdave_185 Posted July 29, 2021 Author Report Share Posted July 29, 2021 She has battery power Ordered a yfz450 limited tail light, ordered the banjo bolt brake switch also for the rear brake Not gonna worry about the front brakes Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
bigdave_185 Posted August 8, 2021 Author Report Share Posted August 8, 2021 Looking for front suspension options, Alba Lone star Houser Full flight (don’t tell me you hate them I don’t need to hear it) Anywhere else I’m missing to look at??Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
kawa110 Posted August 8, 2021 Report Share Posted August 8, 2021 RollFireballSent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
bigdave_185 Posted September 8, 2021 Author Report Share Posted September 8, 2021 Well she looks nice and shiny She didn’t make it fat motor wise. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
gusto Posted September 9, 2021 Report Share Posted September 9, 2021 Shitty. Looks nice though…. 1 Quote Link to comment Share on other sites More sharing options...
bigdave_185 Posted September 15, 2021 Author Report Share Posted September 15, 2021 The general consensus is my jetting was off, 300’s I had but the builder is saying I should have had 330’s. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
RagunCajun Posted September 15, 2021 Report Share Posted September 15, 2021 Take the fancy air breather off the gas cap line too. Those can get stuck and starve the tank for air which starves the carbs for fuel. Just a run a regular open line. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.