JGER Posted September 30, 2020 Report Share Posted September 30, 2020 Hi! First of all: Hello from Germany! Ive been reading in this forum for a while now, today I Signed up because I could use your help. I drive a 2002, with some FMF Gold and K&N Filter, other than that, she´s Stock! I´m pretty new to the Banshee Topic, but not a complete beginner I guess, I´ve had a couple 2Stroke Bikes in the past. So I would say I got the basics down. Still I´m having trouble with my Carburetors. A while ago I Installed a Tors delete (which I had to order from Portugal, just so you know what the parts availability is like in Germany) Tors delete Installation went well. Cleaned my Carburetors, measured the height of the floater?? (I hope thats the right word) and threw in a new bowl gasket. Synced the Carbs, Adjusted them, all went well. The Banshee is running great to this day, but my Carbs are spilling gas in corners. I cleaned the overflow, did a few pulls in a straight line and didn´t see anything, but in corners I can feel the gas spilling against my leg when im riding with shorts. Im looking forward to your suggestions! I guess the "worst case" would be to rebuild the Carbs completely? .....and I hope my english is understandable, I´m doing my best! Greetings from Germany ✌️ Quote Link to comment Share on other sites More sharing options...
375hp banshees Posted September 30, 2020 Report Share Posted September 30, 2020 Both carbs?You drive on the street? i'd say lower the float & try it , they might be on the verge, but if you are on the street, be careful not to run them drySent from my SM-A505U using Tapatalk Quote Link to comment Share on other sites More sharing options...
SKEETER Posted October 1, 2020 Report Share Posted October 1, 2020 Drag race only. Problem solved. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.