iTeach Posted July 27, 2020 Report Share Posted July 27, 2020 Hello Banshee Community, I’m sending my engine to redline for a rebuild. However, I’m not to sure the route I should go. Whether 4mil? Etc. I would like to run pump gas, and an OEM CDI. I’m flexible on the carbs. Also reliability is my first and last priority. I go to the trails often a lot of hills, therefore low end-mid power is important. Any suggestion and advice is welcomed. Thank you. Quote Link to comment Share on other sites More sharing options...
pp13bnos Posted July 27, 2020 Report Share Posted July 27, 2020 You need to tell Cam your goals. Like I've posted before, He's a bit fruity, but knows his stuff about building a motor. Quote Link to comment Share on other sites More sharing options...
HomesteadBanshee Posted July 27, 2020 Report Share Posted July 27, 2020 I was on the same fence until I did some math and compared price on going stock cyl 4 mil or using driveline Cylinder kit and I honestly Did the math I would rather just order the driveline kit and spend the extra money .Which isn’t a lot Of a difference ,if you need to port and bore and order new piston for your stock cylinder.im going to a driveline kit .For that reason i get a 421 cylinder kit for just about a bit more than reusing and restoring my stock cylinders. Quote Link to comment Share on other sites More sharing options...
HomesteadBanshee Posted July 27, 2020 Report Share Posted July 27, 2020 But you can’t go wrong with cam or anything he does I was gonna send out my motor to him if I stayed stock cylinder, but once I get bored of the driveline power I’ll send the driveline cylinders to redline to get ported to see if cam can do his magic on them. Quote Link to comment Share on other sites More sharing options...
iTeach Posted July 29, 2020 Author Report Share Posted July 29, 2020 Or I was thinking about going all OEM. OEM crank and all. And call it a day. Quote Link to comment Share on other sites More sharing options...
GNR101 Posted July 29, 2020 Report Share Posted July 29, 2020 On 7/27/2020 at 11:59 AM, iTeach said: Hello Banshee Community, I’m sending my engine to redline for a rebuild. However, I’m not to sure the route I should go. Whether 4mil? Etc. I would like to run pump gas, and an OEM CDI. I’m flexible on the carbs. Also reliability is my first and last priority. I go to the trails often a lot of hills, therefore low end-mid power is important. Any suggestion and advice is welcomed. Thank you. whats ya budget 4mm stock cylinders are more reliable than stock i ran one for years not an issue ... ever mine had CPI's and PWK33s with 155psi comp as as solid what pipes do you have ?? 1 Quote Link to comment Share on other sites More sharing options...
GNR101 Posted July 29, 2020 Report Share Posted July 29, 2020 10 minutes ago, GNR101 said: whats ya budget 4mm stock cylinders are more reliable than stock i ran one for years not an issue ... ever mine had CPI's and PWK33s with 155psi comp as as solid what pipes do you have ?? also cams good to deal with im currently running a 10mm serval its had cases trenched and ported by cam and im over in australia Quote Link to comment Share on other sites More sharing options...
SandSlingerOR Posted July 29, 2020 Report Share Posted July 29, 2020 Banshees are pretty reliable in any form. If low end is your need go with a 4mil build by cam. Quote Link to comment Share on other sites More sharing options...
gusto Posted July 29, 2020 Report Share Posted July 29, 2020 I would look hard at a welded stock crank with a DriveLine 392 top end. Cheap and with the right pipe your in the 70 hp range Quote Link to comment Share on other sites More sharing options...
iTeach Posted July 30, 2020 Author Report Share Posted July 30, 2020 I’m running FMF’s fattys. It looks I’ll prolly go with a stock ported cylinder 4mil. But keep the opinions running!! Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted July 30, 2020 Report Share Posted July 30, 2020 Cam is gay. Quote Link to comment Share on other sites More sharing options...
GNR101 Posted August 15, 2020 Report Share Posted August 15, 2020 On 7/30/2020 at 8:15 AM, iTeach said: I’m running FMF’s fattys. It looks I’ll prolly go with a stock ported cylinder 4mil. But keep the opinions running!! as a trail or playing in the dunes a actually preferred my FMFs over my cpis on my 4mm build... it ripped you arms off.. just didnt rev to the moon Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.