DallasMf Posted June 15, 2020 Report Share Posted June 15, 2020 Hey guys, new to banshee forum! Trying to get some questions answered. So my banshees top end is really wore out and my step dad and I are going to rebuild it but we figured since we are going to put in some work to it, might as well do a big bore kit but we are unsure on some things. Was looking at the Banshee 66mil 370 big bore kit from wiseco. Don’t need anything insane but it’ll be a nice upgrade to my stock wore out top end. So we don’t know if we can use my stock carbs or if we need some “bigger” ones, if so what size, tried looking for “66mil carbs” bc we thought they would have to match to the kit but had no luck. Probably sounds dumb but we are noobs 😂. Or do we just need a jet kit if so what one? Or do we even need different carbs? Also is there any other mods we will need to do with the big bore kit? Quote Link to comment Share on other sites More sharing options...
SKEETER Posted June 15, 2020 Report Share Posted June 15, 2020 Have cyls ported, bored to next needed size. Simply going to 66mm isnt going to do shit but remove life from your sleeves. Quote Link to comment Share on other sites More sharing options...
gusto Posted June 16, 2020 Report Share Posted June 16, 2020 What’s your budget? porting from a reputable shop will be 300-400 plus bore and pistons your 500-600. It will make a big difference in power, especially if you have good pipes and reeds. or Driveline 392 cc kit for 800 thats what if look into Quote Link to comment Share on other sites More sharing options...
PaymentPlan Posted June 16, 2020 Report Share Posted June 16, 2020 17 hours ago, DallasMf said: Hey guys, new to banshee forum! Trying to get some questions answered. So my banshees top end is really wore out and my step dad and I are going to rebuild it but we figured since we are going to put in some work to it, might as well do a big bore kit but we are unsure on some things. Was looking at the Banshee 66mil 370 big bore kit from wiseco. Don’t need anything insane but it’ll be a nice upgrade to my stock wore out top end. So we don’t know if we can use my stock carbs or if we need some “bigger” ones, if so what size, tried looking for “66mil carbs” bc we thought they would have to match to the kit but had no luck. Probably sounds dumb but we are noobs 😂. Or do we just need a jet kit if so what one? Or do we even need different carbs? Also is there any other mods we will need to do with the big bore kit? Just keep your stock carbs. They can feed up to an 80HP motor without a problem. Quote Link to comment Share on other sites More sharing options...
DallasMf Posted June 20, 2020 Author Report Share Posted June 20, 2020 What size pistons do y’all think I should go with? Without having to change a whole lot. I have t5 pipes and was gon get the vforce4 reeds. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.