FatManBanshee Posted May 22, 2020 Report Share Posted May 22, 2020 Rebuilt the carbs and put v force 4 reeds in. Quad starts and idles perfectly in 1 kick. Drives but as soon as I go to throttle into the power band it doesn’t cross over and will backfire from time to time Quote Link to comment Share on other sites More sharing options...
Eric_C1 Posted May 22, 2020 Report Share Posted May 22, 2020 (edited) Did you put the choke tube between the carbs back in after rebuilding the carbs? how did it run before the carb rebuild? Do you have a carb sync tool? I would make sure they are properly synced after rebuilding. If they are synced and it ran good before the rebuild I would do a leakdown test to make sure you're not sucking in a bunch of air through the intake gaskets that were just put on. I've found that you need to use sealant on the intake gaskets or else you'll be sucking excess air in. Edited May 22, 2020 by Eric_C1 Quote Link to comment Share on other sites More sharing options...
FatManBanshee Posted May 22, 2020 Author Report Share Posted May 22, 2020 I also forgot to mention I have the proflow air filter in the stock air box... before I rebuilt the carbs the quad ran fine. Set the floats at 22mm and tried a bunch of different position on the slide pins to see if it would change anything. Nothing changed. could plug wires or maybe I need bigger jets because of the new reeds/air filters? Stock exhaust by the way. Quote Link to comment Share on other sites More sharing options...
the boris Posted May 23, 2020 Report Share Posted May 23, 2020 I also forgot to mention I have the proflow air filter in the stock air box... before I rebuilt the carbs the quad ran fine. Set the floats at 22mm and tried a bunch of different position on the slide pins to see if it would change anything. Nothing changed. could plug wires or maybe I need bigger jets because of the new reeds/air filters? Stock exhaust by the way.Got the slides other way around? Sent from my VOG-L29 using Tapatalk Quote Link to comment Share on other sites More sharing options...
FatManBanshee Posted May 23, 2020 Author Report Share Posted May 23, 2020 Slides are in place fine... think it’s a jetting issue 1 Quote Link to comment Share on other sites More sharing options...
the boris Posted May 23, 2020 Report Share Posted May 23, 2020 Slides are in place fine... think it’s a jetting issueWhat about air leak? Sent from my VOG-L29 using Tapatalk Quote Link to comment Share on other sites More sharing options...
the boris Posted May 23, 2020 Report Share Posted May 23, 2020 Slides are in place fine... think it’s a jetting issueMaybe you just need bigger main jet. What size jets do you have at the moment? Sent from my VOG-L29 using Tapatalk Quote Link to comment Share on other sites More sharing options...
SKEETER Posted May 24, 2020 Report Share Posted May 24, 2020 Sounds like you need to replace the yellow powerband with a blue powerband Quote Link to comment Share on other sites More sharing options...
the boris Posted May 24, 2020 Report Share Posted May 24, 2020 Sounds like you need to replace the yellow powerband with a blue powerband Skeetz it's the pink powerband he needs, apparently that's the latest big thing.More popular than coc-19 vaccine and 5G network all together. Sent from my VOG-L29 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.