Gdog541 Posted May 14, 2020 Report Share Posted May 14, 2020 I have an 06 banshee I bought and it’s in really good almost new condition it has t5 pipes v force reeds k&n air filter in air box . I am running non ethanol premium with redline two stroke race oil mix. I am a first time banshee owner and fairly new to the Atv riding scene. My banshee smoked more out of one pipe than the other. If you leave the fuel on it will have a puddle underneath it next morning. I was told that it was needing adjustment that it should be trying to lift front tires off the ground as soon as you take off. I think it’s faster than my previous bike a 01 Kawasaki Lakota sport stock but not anything scary faster. I want to know what or where do I start to get it too it’s best performance. Thanks in advance for any input Quote Link to comment Share on other sites More sharing options...
Keno Posted May 14, 2020 Report Share Posted May 14, 2020 Either the float needles need replaced and/or float height needs adjusted. Quote Link to comment Share on other sites More sharing options...
Gdog541 Posted July 6, 2020 Author Report Share Posted July 6, 2020 So I have been messing around with my banshee and I took both carbs out and cleaned them and then they both started to leak and I’ve watched many videos of how to adjust float I have adjusted it I want to say 6 times and one will not. Leak and then I’ll adjust the one with the leak and try it and then they will both dump fuel out. It’s getting frustrating and if anyone can help me out on what I might be doing wrong I sure would appreciate it Quote Link to comment Share on other sites More sharing options...
kawa110 Posted July 6, 2020 Report Share Posted July 6, 2020 Replace the fuel valve needles, or float valve needle. U Can attempt to clean up the fuel valve needle seats or replace these as well. The needles have a rubber tip that can be damaged or “worn” over time. The seat is brass and can become damaged as well. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Keno Posted July 6, 2020 Report Share Posted July 6, 2020 You can put a qtip in a drill and clean the seat sometimes. Quote Link to comment Share on other sites More sharing options...
Burt Reynolds Posted July 10, 2020 Report Share Posted July 10, 2020 Float needles/holes in floats/float height. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.