Banshee aaron Posted May 10, 2020 Report Share Posted May 10, 2020 Why would my banshee suck air throw my gear box oil dip stick Quote Link to comment Share on other sites More sharing options...
the boris Posted May 10, 2020 Report Share Posted May 10, 2020 Why would my banshee suck air throw my gear box oil dip stick Because your seals are blown, but I would think it would suck trans oil first Sent from my VOG-L29 using Tapatalk Quote Link to comment Share on other sites More sharing options...
the boris Posted May 10, 2020 Report Share Posted May 10, 2020 Who did the work on the bike, you or some rip off mechanic? Sent from my VOG-L29 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Banshee aaron Posted May 10, 2020 Author Report Share Posted May 10, 2020 So it boug out when u take off but if u take the dip stick off run perfect and the guys is pretty good he works on everybody bikes he said seals but I wanted to make sure he wasn’t trying to charge me for nothing he said it could be the seals or somthing got in the bottom end like the piece of the piston that’s was off the piston when I pull the top it was bang up pretty good and broke a piece off so what does he gotta do on the seals take the bottom end apart Quote Link to comment Share on other sites More sharing options...
the boris Posted May 10, 2020 Report Share Posted May 10, 2020 Yes, split the cases to change the seals. Sent from my VOG-L29 using Tapatalk Quote Link to comment Share on other sites More sharing options...
the boris Posted May 10, 2020 Report Share Posted May 10, 2020 That is not good mechanic at all.If he installed brand spanking new top end on the bike, without inspecting the bottom first, he is fukin dodgy bastard. Sent from my VOG-L29 using Tapatalk Quote Link to comment Share on other sites More sharing options...
the boris Posted May 10, 2020 Report Share Posted May 10, 2020 If I was you, I would get service repair manual, tear the whole bike apart, inspect everything and rebuild myself. If you have patience and attention to detail it's as easy as making a sandwich. Sent from my VOG-L29 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Banshee aaron Posted May 10, 2020 Author Report Share Posted May 10, 2020 Ya I was just checking that out about getting the hole bottom and rebuilt if I’m going to open it I’m good with dirt bikes well most stuff on them not rings and piston well I wasn’t tell I watch him now I know how easy it is I will never pay anybody to do my top end again and i took the tors off but do u need two idle screw or is good with one im good with listen to people on her wel I understand with talk and videos real good so I think I’m going to do that just take it down I work on all my cars all my life big to little so I’m mechanic incline so I’m not dumb to it just new and I’m finding a lot out on two strikes I’m rebuilding my son 60 now got big bore top end and all thanks u guys I just dididnt want it to be somthing else I wanna ride my shee Quote Link to comment Share on other sites More sharing options...
the boris Posted May 10, 2020 Report Share Posted May 10, 2020 You need both carburettors to have idle screws. Sent from my VOG-L29 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.