13B-RX3 Posted April 19, 2020 Author Report Share Posted April 19, 2020 They were brand new out of the bag.Sent from my SM-G965U using Tapatalk Quote Link to comment Share on other sites More sharing options...
n2otoofast4u Posted April 19, 2020 Report Share Posted April 19, 2020 Let’s see a pic of the car in you Avatar! Quote Link to comment Share on other sites More sharing options...
13B-RX3 Posted April 19, 2020 Author Report Share Posted April 19, 2020 That's what I chose if I really wanna roll my socks up and down!Sent from my SM-G965U using Tapatalk Quote Link to comment Share on other sites More sharing options...
SKEETER Posted April 19, 2020 Report Share Posted April 19, 2020 That thing is way cooler than a outboard boat with gay tribal designs n purple seats ! 1 Quote Link to comment Share on other sites More sharing options...
13B-RX3 Posted April 19, 2020 Author Report Share Posted April 19, 2020 Thanks, I think.Sent from my SM-G965U using Tapatalk Quote Link to comment Share on other sites More sharing options...
13B-RX3 Posted April 19, 2020 Author Report Share Posted April 19, 2020 Ok, finally have some answers instead of questions. Did multiple plug chops today from 148-162. Not much difference in the width of the smoke ring. In the last pull a happened to look down and the fuel line was completely empty . Like like I'm in the market for a pingle valve. At least I'm making progress.Sent from my SM-G965U using Tapatalk Quote Link to comment Share on other sites More sharing options...
13B-RX3 Posted April 19, 2020 Author Report Share Posted April 19, 2020 Does anyone have the bolt hole center dimensions for the banshee prtcock? I think it's the same flange as mine, I just want to make sure.Sent from my SM-G965U using Tapatalk Quote Link to comment Share on other sites More sharing options...
kawa110 Posted April 19, 2020 Report Share Posted April 19, 2020 Pingel gasketHard to get good photoSent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
13B-RX3 Posted April 20, 2020 Author Report Share Posted April 20, 2020 Pingel gasketHard to get good photoSent from my iPhone using TapatalkPerfect! Thank you!Sent from my SM-G965U using Tapatalk Quote Link to comment Share on other sites More sharing options...
13B-RX3 Posted April 26, 2020 Author Report Share Posted April 26, 2020 If the soot ring isn’t growing I would guess it is lean in the mid range color wise I like the 162 plugs any chance you can lift the needle 1 notch (lower the clip) with the 162 then do a 20 min ride no more than 1/2 throttle. Please post pick of 20 min plug whole then chopped only need to chop 1 plug for this test. Do you have a laser thermometer after your run take a temp of the cylinders and one of the pipe on each side about 3 inches off the jug. ThanksOk, finally got to spend some time with the bike today. Did plug chops with 152 and 148, wanted to get everyone's opinion. Also did a 30 min ride with a brand new plug, no more than half throttle. Left cylinder head temp was 211 at the outside of the head, right was 210. Pipe temp 3" from the cylinder was 266 left, 264 right. Thanks in advance everyone!Sent from my SM-G965U using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.