jnormie917 Posted March 29, 2020 Report Share Posted March 29, 2020 I bought a banshee that I'm rebuilding and I noticed that the pin for sixth gear has been shaved/ground off of the shift star. Other than that it appears to be a completely stock shift star(its steel not billet and the lobes aren't rounded off). For some reason I didn't notice the shift star until now, so the cases are already together. I didn't notice anything out of the ordinary with the shift drum and gears, but I didn't think to compare them to an OEM. From what I've found so far most override tranny mods have the channels in the drum machined wider in certain spots, and there wasn't any of that on my drum. I am able to turn the star with pliers and put in sixth, so that makes me think that its a stock drum, but I don't have any experience with tranny mods so I could be wrong. I'm wondering if it would be possible to weld a pin or drill and tap a hole or something to add the sixth gear pin back onto the star, or if it would be better to just buy a new one. Quote Link to comment Share on other sites More sharing options...
hoppedupandcutdown Posted March 29, 2020 Report Share Posted March 29, 2020 The gear is in the valley of the star Post a pic of what you have Stars are cheap. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.