Jump to content

93 banshee Exhaust upgrade


Domenick

Recommended Posts

  • Replies 30
  • Created
  • Last Reply

Top Posters In This Topic

^^ did you also check the tip on gauge is correct length, need to be close to same length as spark plug. El cheepo compression tester can give false readings. As mention above leak down test, spay soapy water over engine to look for leaks if engine does not hold 6psi for required time.

Sent from my LG-H873 using Tapatalk

Link to comment
Share on other sites

If you can try to get a better tester. Fist off build yourself a leak down tester you can get all the stuff at hardware store or buy one from flea bay. You use a bike tire pump to bring pressure up to 6psi and watch gauge to see if leaking. If it drops pressure then spray down engine to look to leaks.
Compression test after leak down. A leakdown will help point you in the right direction

Sent from my LG-H873 using Tapatalk

Link to comment
Share on other sites

Thank you everyone I am going to take the engine out of the bike this weekend and do the pressure test thank you everyone for your information and guidance I will let you know how I make out. The whole bike is brand new front to back top to bottom left to right wiring carburetors everything I’m hoping that with your information and guiding so I could get this running. Thanks again

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...