Killacaviar Posted September 11, 2019 Report Share Posted September 11, 2019 Hey guys, I used to spend some time on this site when I was a teenager and had my first banshee. Well I’m 32 now and seems like I’ve come full circle. I’ve been out of the game for 10 years up until this past March when for some reason I purchased a 06 ltr that was pretty built up for mx. Bike sat forever, ran like shit. So I fixed it a traded it for a banshee seeing I missed my 02 I sold to get a yfz back in 2004. I still have my yfz that’s set up for xc but have no real desire to get it back to where it needs to be to feel good. I also acquired an 86 atc250r that I restored as a rider as well. I guess you can say I got the bug again. I got this bike a few months back and rebuilt it with a pretty basic ported motor. Took it to some coal here in pa and honestly hated it. So I sold everything and started over last week. Here are some picks from the moment I got it, the previous build and progress in this build. Anyway, let me know what you think. Or don’t. Regardless, I’ll have a place documenting the progress of the bike. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
SandSlingerOR Posted September 11, 2019 Report Share Posted September 11, 2019 Nice 250r and shee. Why did you hate riding it on the coal hills? I'm out west but the coal looks fun. Quote Link to comment Share on other sites More sharing options...
gusto Posted September 11, 2019 Report Share Posted September 11, 2019 Sweet rides! Quote Link to comment Share on other sites More sharing options...
Killacaviar Posted September 11, 2019 Author Report Share Posted September 11, 2019 Nice 250r and shee. Why did you hate riding it on the coal hills? I'm out west but the coal looks fun.I love coal hills, l always have. Built this for them in mind. I just wasn’t a fan of the motor. There are a good amount of hills with no run up and the bike would struggle from time to time. Top end screamed but came on to late for me. I got a driveline 421 Hp setup and a set of slp’s to try instead of the shearers. Either way the more power is welcomed and I’ll figure out what pipes give me what I want. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
gusto Posted September 11, 2019 Report Share Posted September 11, 2019 I’d be curious to know how those pipes perform on the big hills Quote Link to comment Share on other sites More sharing options...
Killacaviar Posted September 11, 2019 Author Report Share Posted September 11, 2019 As am I. I’ve never ran them but the dynos on here seem very promising for coal. I’ll be heading back out in a few weeks when I get it all together. I’ll let you know for sure. Shearers pulled hard through the gears as long as you had a little lead to hit the hill in third. I had issues when it was a tight tree start. It also might have to do with it just being ported. We had so much rain this past spring everything is pretty washed out. Quote Link to comment Share on other sites More sharing options...
Ayesully810 Posted September 11, 2019 Report Share Posted September 11, 2019 (edited) you will love the slps for climbing hills. instant power. i miss my old set. you running race fuel or pump? when i ran mine on race gas at 180 psi it had so much bottom end Edited September 11, 2019 by Ayesully810 Quote Link to comment Share on other sites More sharing options...
Killacaviar Posted September 11, 2019 Author Report Share Posted September 11, 2019 you will love the slps for climbing hills. instant power. i miss my old set. Awesome, I’ve seen you’re quite the advocate for them. I have just got the same set up you had but the H.P. I’m excited to try it out. Sent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
Killacaviar Posted September 11, 2019 Author Report Share Posted September 11, 2019 I have pump domes in it but I have a set of race to switch to. I run 110 in my little 70 and my 250r so, I’ll definitely try them out at some point. Sent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
SandSlingerOR Posted September 12, 2019 Report Share Posted September 12, 2019 The new motor set up should be much better. I've always had play'ish motor setups, and had enough low end for short run ups and take offs down in the trees. My buddy had a drag ported set up and hated it like you. Let us know what your thoughts are on this new motor. Quote Link to comment Share on other sites More sharing options...
Killacaviar Posted September 13, 2019 Author Report Share Posted September 13, 2019 Made some progress tonight on the banshee. Motor is in and pipes are on. I have a trip to trevorton next weekend planned to give it a try. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
SandSlingerOR Posted September 13, 2019 Report Share Posted September 13, 2019 Wow tis gorgeous Quote Link to comment Share on other sites More sharing options...
gusto Posted September 13, 2019 Report Share Posted September 13, 2019 Wow! Love the colour Quote Link to comment Share on other sites More sharing options...
Killacaviar Posted September 13, 2019 Author Report Share Posted September 13, 2019 It’s a two time blue. Chrome under coat and a blue top. I’m really happy with it. I was going to go all white but when I walked into the powder shop fell in love with this. 180 bucks for the frame. Swinger. A arms. Stem. And a few gold accents. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
kawa110 Posted September 13, 2019 Report Share Posted September 13, 2019 I like the gold. Looks good with the blue. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.