jason.perez Posted August 27, 2019 Report Share Posted August 27, 2019 Is it even possible to run these huge 34mm flatslide carbs on a almost stock banshee. Or get it to run close to decent. If so what’s jets and needles should I be running at 300ft with Toomey t5’s and uni pods Quote Link to comment Share on other sites More sharing options...
375hp banshees Posted August 27, 2019 Report Share Posted August 27, 2019 You can, but it's a waste, but if that's all you have? you're going to lose some bottom end and won't be ideal , but you can tune it to run okay Quote Link to comment Share on other sites More sharing options...
jason.perez Posted August 27, 2019 Author Report Share Posted August 27, 2019 Like will it barely be a noticeable difference or u could diffenatly tell? Also have a pair of vm26-606 there close to oem but not it. The needle jets are different they screw in. Ive tried all the way from 320 to 350 mains didnt really make a diffence the bike wouldnt hit the power band ive tried all needle clip positions (red vitos jet needle) and still only hits powerband in first and very late. almost like a rev limiter hits but i have no parking brake and tors box is unplugged. So i was wondering if those carbs would work thats all i got right now. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.