martin059 Posted August 10, 2019 Report Posted August 10, 2019 Ok so when I pull on the clutch it has pressure. So when I put it in gear and pull on the clutch it won’t let it roll the clutch stays engaged if I tight the screw all the way the clutch gets really hard and it still won’t rollAlso I don’t have enough Thread to put this nut on is this ok Sent from my iPhone using Tapatalk Quote
martin059 Posted August 10, 2019 Author Report Posted August 10, 2019 Lane did from driveline Sent from my iPhone using Tapatalk Quote
martin059 Posted August 10, 2019 Author Report Posted August 10, 2019 I’m supposed to bring it to his shop for a tune and dyno but I can’t get ahold of him Sent from my iPhone using Tapatalk Quote
Pinkylee Posted August 10, 2019 Report Posted August 10, 2019 I'm not familiar with that particular clutch set up, but just by looking at it? Makes me wonder 2 things.. 1.) Is the outer hub clocked in the right position ? 2.) Does the pancake bearing have the correct length set screw for YOUR set up ? If it were me? Either one would leave you without enough threads for the locking nut. If it were ME ? I would unbolt the outer hub and turn it one bolt hole and see if that fixes it. Quote
martin059 Posted August 11, 2019 Author Report Posted August 11, 2019 I figured it out Sent from my iPhone using Tapatalk Quote
Pinkylee Posted August 11, 2019 Report Posted August 11, 2019 ...Good ..What was the problem ?? Please post answer in case someone else has same or similar issue..Sent from my LG-H700 using Tapatalk 1 Quote
martin059 Posted August 11, 2019 Author Report Posted August 11, 2019 Im a dumb ass had to adjust the screw because at first I had no pressure on the clutch lever Sent from my iPhone using Tapatalk Quote
martin059 Posted August 11, 2019 Author Report Posted August 11, 2019 Heading to driveline On Tuesday for a tune and dyno can’t wait feels like it took me for ever to get the banshee complete. Sent from my iPhone using Tapatalk Quote
Pinkylee Posted August 11, 2019 Report Posted August 11, 2019 Im a dumb ass had to adjust the screw because at first I had no pressure on the clutch lever Sent from my iPhone using Tapatalk.. No worries..we all miss the simple stuff sometimes..Sent from my LG-H700 using Tapatalk Quote
Ayesully810 Posted August 12, 2019 Report Posted August 12, 2019 what time? im going there tomorrow to pick up some parts for my buddy Quote
martin059 Posted August 13, 2019 Author Report Posted August 13, 2019 Trying to be there around 11 am or twelve I’ll text you when I’m an hour awaySent from my iPhone using Tapatalk Quote
AKheathen Posted August 21, 2019 Report Posted August 21, 2019 this is what the arrows are for. you get your free-play in the clutch arm at the adjuster, then you pull the cable in to the arrows. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.